Centroid Community CNC Support Forum

Here are better pics .

Sorry to bother everybody, here is the report. Not what I expected?? Any how in the meantime I did this little piece and it came out ,,,,,not as expected. report_0113202340_2023-03-03_13-39-15.zip . I'm pretty sure it was secured to the table properly and I did another sample piece in wood that had ...

Hate to be a pain but I can't find out how post a report. I poked around for a while but no success.
Pat

Here is the report, I had a hell of a time trying to search for it and when I tried to open it there was a bunch of files that I don't understand. I had read one a while ago and I don't think this is the same.

Sorry for the delay, I will get a report and double check the revs per inch. Thanks for your patience.

OK, so just as a reminder this machine is recovering from a bunch of parameters that had to be reset. The one I'm dealing with now is acceleration, the Z axis bar was turning red and making position errors. So now I went back to the Installation Manual and on pages 63 and 64 went thru and reset the ...

So I had to go into 137 and reset HOME and that appears to be a problem solved. For some reason the Z axis had a 37 and change dimension displayed, don't know what causes that.
So thanks everybody I hope that I never have to go thru that again!!!!!!!
Pat

Had to change it and yes that was a problem.
Thanks

Even more, the ETHERNET cable has green and yellow LED lights on the ALLINONE board, but on the computer display where it plugs in the back the green light is steady but the yellow light is blinking.

Another thing I just remembered concerning CNCSNW's message. I never had a handheld pendant and H18 is not used in my machine ( never was). So is there a setting or parameter that will control that. I looked thru the parameters in the manual and didn't read anything relevant.
Pat