Centroid Community CNC Support Forum

Recalibrated the z axis servo and the issue seems to be resolved.

I was cutting a gear when something went wrong. The first gear, pictured on the right went fine. The second gear started cutting adifferent pattern. Any thoughts. Thanks

The update solved the issue. Thanks again

Thank you

Thank you

No, I do not have CHIPS 2.2

I homed the machine, moved it to the centre of the machine, set xy to zero. Then started the program. I am using CHIPS, the program terminated before the tool touch off process. It has worked before, so not sure.

Hi,
I just installed the latest version of CNC12, V12.52. When I went to run a spoilboard surfacing program I received "z-axis travel exceeded". It is the same program I ran earlier in the day with V12.5. Not sure what is going on. Any help would be greatly appreciated.

Today, I pulled all the covers off and stared. I changed spindle settings in the wizard back with the 5V option off. It is actually Al2 thatwas giving of 12V and not Al1. So got that far. The way the drawing is and the way the actual terminals are a liitle different. I switched the 2 COM wires ...

Hi, I have the VFD all wired up and I had to change the spindle voltage to 5V and when I tested it with my volt meter I get 12V, Is there a way to force this to 10V? Thanks