Centroid Community CNC Support Forum

Guys, My M Codes were messed up. Got it sorted but it was so helpful to have a place to start. Thanks for the help. Didn't even think to check the M Code Files. Appreciate it always gentlemen.

Scott,

Very interesting. Im gonna take a look tomorrow. Wonder if my PLC install didn't come in with all the macros complete. Thanks for the reply. I'm gonna take a look at CNCM files tomorrow and Ill let ya know.

Appreciate the reply immensely.

Centroid Family,

Ive got a strange issue: I can make my spindle turn on and off using the VCP and forward/reverse as well as register my 0-10 volt
RPM command. When I try and execute an M3 or M4 in the MDI I don't get anything happening. No green lights coming on my diagnostics screen when issuing ...

Hi all,

trying to find a way to make my spindle fan output 19 on oak run 2 minutes every 5 minutes. I’ve got it wired to my lube also and don’t want it constantly draining my air on my compressor. Is there a way to make this relay turn on for 2 minutes every 5 minutes or any other custom time ...

Hello All,

I'm trying to get my 4th axis calibrated correctly. This is a horizontal machining center so the 4th axis is actually a pallet. I've removed the
original Mazak motor and replaced with DMM motor and Drive. I've got it set up as a B axis in CNC 12 and I have parameter 94 set to 1 and
I've ...

THANKS GENTS so much for all the replies!!! I always appreciate you guys taking the time to help me out.
Yall are a bunch of awesome people.

Here's what the issue was:

I hadn't yet applied 24 volts to my H2 terminal on Oak and this is what was causing my error. Such a small stupid thing to ...

Hi All! Just finished installing new Dyn4 Servos and Drives. I'm using oak and haven't been able
to get my motors to turn or enter the MDI screen without it kicking me out.
I have green lights on all my drives "on position" in DMMDRV software. I've set all to A/B phase, precision mode
active low ...

Marty, CNCSNW you two always get me through my issues.
My problem was it was looking for the 1616 board in parameter 900. I set it to 0 and now it will stay on. Marty, I made the estop mistake having one NC and one NO leg on my last build so not a stupid suggestion...I made that mistake already ...

Hello All,

I'm having a strange issue with my latest build. The estop output 01 wont stay on green when I release my Estop switch. The input on H14 will stay lit up however, the relay output 01 keeps switching to off. I cant seem to find out what my issue is. I've set all the bench testing inputs ...

Hello all, just starting a retrofit of a horizontal dual pallet Mazak HTC 400. This particular machine has a servo that rotates a round tool carousel with a big timing belt. I have 31 pockets on this tool carousel and the X and Y axis travel to a specified lower corner position to slide the tool ...