Centroid Community CNC Support Forum

There is no need to assign VFDEnable_O to an output.
You would not do so if you choose to use SpinFWD and/or SpinREV instead.

SpindleEnableOut_M is a memory bit (MEM168), which is always in place.

I would open up PLC Detective (Ctrl-E from the CNC12 main screen), scroll down to around line #3745 ...

But it worked perfectly for 3 years without problems.

Well, I will try to change this, it’s a Chinese vfd

You get a point. But how do you explain that the relay for forward command (m3) doesn’t activate?

suntravel wrote: ↑Sun May 26, 2024 2:29 am You have no Output VFD Enable

Uwe

What do you mean?

Hello,

Here is a strange problem.
My Router was working perfectly, spindle was ok (starting/stoping with a program)

But after sometimes when I start a program (whatever the program), the spindle starts correctly, the program is perfectly executed, the spindle stops then I start a new program ...

Here is the report of my system

Hi,

I’m using a laser to align part on my router.
I assigned it in wizard to outpout 8.

2 strange things happen :
- when I start cnc12 and launch homing, the laser activate for no reason
- when I use M94 /29 to activate the laser, it’s working but when I use M95 /29 to deactivate the laser ...