Centroid Community CNC Support Forum

Hello. Marty.

I am trying to run my mill converted to cnc with centroid version 12v .5 software and using the fusion 360 post processor.
I already generated a cam in fusion to run with the probe in a fixture
everything is fine but I can't generate the G codes for centroid
could you support me ...

Thanks.
Keith.
Regards.

Juda

Hello. Keith

I am new to the forum, and I have seen the videos of the import of the
dxf files and in my system acorns 12v4.50 I do not see the
DXF key how can I fix this problem.
Regards.
Judah

Ok keith
As soon as I do I send them to you
Thank you.

Hello cnckeith.
You can support me in this situation.
I did an upgrade to my three axis vertical milling machine with its
acorn software 12 v_4.5 then upgrade to version 4_62
everything is fine, only when you want to run the machine with a drilling or pocket program etc. This legend of mfunc6.mac ...

Hello Swissi. okay. I will review them. .
But first, I would like to tell you that I retrofitted a conventional milling machine with hybrid servo motors and the acorn12 controller.
For 4 axes, at the moment I already have the equipment configurations, it is running well, from the beginning to the ...

Good morning.

Swissi just bought a KP-3 probe to be able to make some measurements on a milling machine with acorn 12 software.

I already managed to see some videos on how to configure the KP-3 probe butI need to measure several holes at the same time and in the three axesX, Y, Z could you support ...