Centroid Community CNC Support Forum

Hello, After a few restarts, the x axis now works properly. I could now Set All homeswitches on my cnc, but one Problem remains. On the y axis i get the error 412 and sometimes also 455 a e stoppen doesn't clean the Problem, so i disabled Stall detection start mdi and aktivated Stall detection again...

Hello, today i had time to work on my hurco again. I wanted to try to use one of the two encoder Inputs, so that i can use the Standard Configuration and also have the possibility to Upgrade my cnc with a 4th axis without buying an additional output for the oak. So i switched parameter 308 to 6, i a...

Thats the parameters i switched

I have edited the parameters that now axis 2-4 are used as x y z axis, but now the Problem is that as soon as i press the x axis on the virtualisierung controlboard it instantly gives out error 9025. I have switched the x and the y axis Header on the oakboard, but the problems stand on the x axis, s...

Okay thanks, that was the answer i was scared of, cause i started my project in 2019 my warrenty is already expired. For now i can help by using axis 2-4 as xyz axis, but later i want to Integrate a a axis also. Could i ouse the encoderinputs 5 or 6 for that, so i wire the axis like the other only t...

Hello everbody, I have a Problem on my ongoing project to retrofit a hurco bmc 40 with lichuan ac Servos. I get no Abs Pos. Change when rotating the servo on the x axis. I ruled out any defect from the driver or the cable, cause when the wires of the axis are switched, the problem remains on the fir...

Yes exactly, i checked de pid values After i posted my Problem, it's now working as wanted, sorry for Washington your time with this Problem

Hello, sorry for the Fast shot i made a mistake by resetting the pid values, there i also set kv1 to 0 which resulted in no movement

I forgot to say that i have disabled Stall detection