Search found 13 matches
- Mon Jun 26, 2023 12:30 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CNC12 v5.04 has been released.
- Replies: 5
- Views: 636
Re: CNC12 v5.04 has been released.
I recently installed 5.04 Router over 4.8* mill. While setting up my machine I needed to synch my 2 y-axis gantry motors. When I opened this option with the wizard I was informed that synching and auto square were only available with the PRO version. Is this the case or did I do something wrong?
- Thu Apr 08, 2021 9:50 am
- Forum: Centroid Acorn CNC Controller
- Topic: X0 & X-direction reeset
- Replies: 5
- Views: 1530
Re: X0 & X-direction reeset
OK. 200 has worked in the past but I will reset controllers for 1600 and the counts per rev with the wizard. Then check to see if that solved the problem. My stepper drive is a stepperonline DM542T and the stepper motors are stepperonline 23hs45-3504s. Will return after adjusting counts/rev.
- Wed Apr 07, 2021 1:59 pm
- Forum: Centroid Acorn CNC Controller
- Topic: X0 & X-direction reeset
- Replies: 5
- Views: 1530
Re: X0 & X-direction reeset
Machine is a router that has run satisfactorily for over 1 year. I use pairing, auto home to switches, auto square and software travel limits all of which seem to operate correctly. Recently completed annual maintenance: re-squaring, tramming, axis travel re-calibration and cnc12 update. Attached g-...
- Tue Apr 06, 2021 7:31 pm
- Forum: Centroid Acorn CNC Controller
- Topic: X0 & X-direction reeset
- Replies: 5
- Views: 1530
X0 & X-direction reeset
In the middle of running a g-code program my X0 and X-direction are reset thereby destroying the rest of the program. It seems to b e random. I have tried several things like (1) restart Acorn and cnc12, (2) restart computer (3) Set windows 10 as per Marty's garage latest set & bench test video ...
- Tue Mar 30, 2021 10:15 am
- Forum: Centroid Acorn CNC Controller
- Topic: auto Homing turns pairing off
- Replies: 9
- Views: 1942
Re: auto Homing turns pairing off
It appears that I have erased this file. I will try to contact Centroid and see if they will resend it.
- Tue Mar 30, 2021 9:54 am
- Forum: Centroid Acorn CNC Controller
- Topic: auto Homing turns pairing off
- Replies: 9
- Views: 1942
Re: auto Homing turns pairing off
OK. It says Acorn free. I thought that when I restored an older report that it would also reset the license. What do I do now?
- Tue Mar 30, 2021 9:05 am
- Forum: Centroid Acorn CNC Controller
- Topic: auto Homing turns pairing off
- Replies: 9
- Views: 1942
- Mon Mar 29, 2021 10:10 pm
- Forum: Centroid Acorn CNC Controller
- Topic: auto Homing turns pairing off
- Replies: 9
- Views: 1942
auto Homing turns pairing off
I reinstalled CNC12 4.64 and reset all the Wizard settings (correctly I believe). I set it up for auto home and auto paring using a y-axis master and slave. I jog tested to be sure that the slave home switch opened before the master switch ( about 0.030 difference in travel). I squared the gantry an...
- Wed Oct 14, 2020 3:56 pm
- Forum: Centroid Acorn CNC Controller
- Topic: VCP fast/slow jog button does not work
- Replies: 2
- Views: 1017
VCP fast/slow jog button does not work
The fast/slow fog speed on the virtual control panel has quit working after I turned off the smoothing. I have tried several things, but no success. The latest report is attached. What do I need to do to restore the fast/slow jpg toggle?
- Sun Sep 27, 2020 6:53 pm
- Forum: Centroid Acorn CNC Controller
- Topic: X-axis reversed in one direction
- Replies: 3
- Views: 1214
Re: X-axis reversed in one direction
Thanks! I will make these tests and get back to the message board.