Centroid Community CNC Support Forum

I recently installed 5.04 Router over 4.8* mill. While setting up my machine I needed to synch my 2 y-axis gantry motors. When I opened this option with the wizard I was informed that synching and auto square were only available with the PRO version. Is this the case or did I do something wrong?

OK. 200 has worked in the past but I will reset controllers for 1600 and the counts per rev with the wizard. Then check to see if that solved the problem. My stepper drive is a stepperonline DM542T and the stepper motors are stepperonline 23hs45-3504s. Will return after adjusting counts/rev.

Machine is a router that has run satisfactorily for over 1 year. I use pairing, auto home to switches, auto square and software travel limits all of which seem to operate correctly. Recently completed annual maintenance: re-squaring, tramming, axis travel re-calibration and cnc12 update. Attached g-...

In the middle of running a g-code program my X0 and X-direction are reset thereby destroying the rest of the program. It seems to b e random. I have tried several things like (1) restart Acorn and cnc12, (2) restart computer (3) Set windows 10 as per Marty's garage latest set & bench test video ...

It appears that I have erased this file. I will try to contact Centroid and see if they will resend it.

OK. It says Acorn free. I thought that when I restored an older report that it would also reset the license. What do I do now?

Yes.

I reinstalled CNC12 4.64 and reset all the Wizard settings (correctly I believe). I set it up for auto home and auto paring using a y-axis master and slave. I jog tested to be sure that the slave home switch opened before the master switch ( about 0.030 difference in travel). I squared the gantry an...

The fast/slow fog speed on the virtual control panel has quit working after I turned off the smoothing. I have tried several things, but no success. The latest report is attached. What do I need to do to restore the fast/slow jpg toggle?

Thanks! I will make these tests and get back to the message board.