Centroid Community CNC Support Forum

Well I see now what seems to be happening. There's a G21 at the beginning instead of the G20 I usually run. The vise I am making these for is metric. I switched the first setup back to inches but I guess I didn't for the second setup. So it's another user error. :roll: I'm usually running inches 99....

Here's 2 photos for your viewing pleasure. I'm using the TTS holders and I've made/printed some cups for tool pockets. It's very simple and cheap but works when I don't run into bugs. The holders are on the -X (X-19.00) side of the table but for some reason the program I attached sends the spindle t...

I've narrowed it down to this program(attached). It's a simple 3 tool program to clean up the top hat for some soft jaws. The T7 M6 is called and the machine rapids to the opposite side of the table in the X direction. It went to some random position and dropped my tool... I have a drop in type ATC ...

Thanks so much. I’ve updated my macro with the one you shared. It’s been working smooth for the past two days.

If there's already a post for this please point me there. I really hope this makes cents.... ;) My machine is setup and using the rack mount ATC using Holes. My tool library isn't updating properly with the right tool bin when doing a T01 M6. If I use the Menu (Setup->ATC) button it works fine. It w...

My obsrevation to this issue: https://centroidcncforum.com/viewtopic.php?f=60&t=7354&start=80 But I can not get CNC12 to crash, only the display is "clutterd" Uwe I agree with this. I didn't find this one in my early search. Since there is no real error code generated it was shoot...

So, I guess you can call me crazy! I restarted the PC again, standard Windows fix. I went through 11 tool setting cycles, and probed my vise a couple times... I can't replicate the error now. I was taking video through all of this... I'm hoping the bug has been squashed. This was happening intermitt...

Hey everyone! I’ve searched the boards for probing error topics but can’t find one for my specific issue. I’m not getting an error message which makes it more difficult. I’m including a photo for reference. It’s an intermittent issue and I haven’t pinned down what is causing the issue. This happens ...

Danke schön Herr Uwe.

Ok. I tested on my lathe to open / close the chuck with the WMPG. Set Output 7 to CloseChuck and Output 8 to OpenChuck in the Wizard With the VCP the outputs are activated for 3s, because parameter 992 is set to 3000 Macro for the WMPG N100 M94 /6 G4 P4 N1000 opens chuck like the VCP and second mac...