Centroid Community CNC Support Forum

I installed V5.1 and have it working well. Thanks all.

Hi,
Im trying to install a TT4 probe on my lathe.
Im running ver 4.64 and the description and specifications documentation says use CNC12 V4.5+ so I should be ok...
but I don't see the "TOOL TOUCH OFF TYPE" TT4 its not listed in the wizard.

Can I use KP3 as the probe selection?

Thanks,
John

I don't see any serial # on the pendant. This was never used, I would like to get $100 and free shipping.

I have a large pendant for sale. Its in storage so I dont have a pic on hand. Its in new condition about 48" long 4x4 steel tubing.
Pics on request.

The tool number, offset and turret moves to the correct position but the DRO A axis (turret axis) does not display tool number like it did with the older version.
I'm OK with removing the A axis from the DRO display so thanks for the work around.

I updated to 4.64 and the tool changer works fine rotating the tool changer and keeps the correct tool offsets OK but the A axis will not display the tool number correctly, it just keeps counting up on the A axis.
So I would like to have the tool number displayed on the A axis or just remove the A ...

This is a lathe conversion that uses the Acorn controller. I replaced all lead screws with ball screws. On the X axis I replaced the dove tail ways with 25mm linear bearings. I left the back accordion way cover off so you can see the conversion. The turret works great but I do have the program wait ...

Short video of the machine can be found here

This is my custom designed & fabricated CNC glass polisher. Its designed to keep the polishing grit above the moving mechanical components. Designed in SolidWorks and uses Centroid Acorn control. 8 week design to completion project. I didn't pair the X Axis I used timing belts to keep it simple ...

I need to do this very procedure for 5v control. What is the file name that the changes need to be made in?
Thanks,
John