Centroid Community CNC Support Forum

ok, post processor is working through sheetcam. Now do i need a macro to fire the torch? Running the machine with the new post processor does a touch off using my float switch , and travels where it should, but never tries to fire the torch. When i was using the mill license , i had a macro to do th...

Using a stepper on the z axis, clearpath servos on the x and y. The neuron is a full stand alone that takes over the z axis, that was the main reason for wanting to give it a try. Currently not running a thc, as we usually only cut 18ga-1/4 inch sheet / plate. havent seen a need for it yet. But the ...

I would be interested in trying this on our custom 4x8 built plasma. Acorn, clearpaths, z stepper, I actually have a neuron THC to put on, but would be willing to compare the two.

I wont be back to the machine until Tuesday

home built plasma table with centroid acorn pro currently running x axis test and pairing without the gantry being attached. only the two side arms with motors. one is axis 1 the other is slave. before pairing, both sides moved in the negative direction and homed off of the home switches correctly....

home built plasma table with centroid acorn pro currently running x axis test and pairing without the gantry being attached. only the two side arms with motors. one is axis 1 the other is slave. before pairing, both sides moved in the negative direction and homed off of the home switches correctly. ...

I've heard someone got the Neuron THC to work with the Software, i'll have to find out more, as I was a THC with control of the Z axis.

1 main problem I'm having with plasma is not being able to since the material between cuts 2 The tool touch off would be a good start you can already set the offset I use it on the 1st cut to set the distance from the metal but it needs to working between every cut I have the tool touch off wire ho...

legacytorch wrote: ↑Thu Dec 19, 2019 11:40 pm Successfully using Centroid Acorn on a plasma table for almost two years. It's good now... It will only get better.

What thc are you using?

Seems like they haven't really been working on this much. Guess i'm going to go with the CandCNC instead. I had high hopes for this, but dont want to keep waiting any longer.