Centroid Community CNC Support Forum

Trying out 5.1 RC5 today. Auto Z to plate not working. I have a NC TT device setup in the wizard as mechanical, input state when triggered=open This shows to be working correctly in the diagnostic screen, however when using auto z to plate it doesn't work. Z keeps moving until it triggers the over ...

wjh308,

I see you are on V5.06, there may of been a fix for NC probe and WMPG in V5.08. Save a backup and try installing the current V5.08 and see if that helps the situation.

Hello AVP, 1. Try setting the Custom M6 macro in use setting under the CNC Control Preferences page instead of the ATC Menu. Or the ATC Menu one, which ever one you have not been trying before. 2. It appears the wizard is writing the value of the Z height flyover properly, but not reading it back in...

Hello All; I am using CNC12 5.08 Attempting to install the ATC, I run into a problem with the wizard ATC Setup. It lists the tool change y Value, Distance and direction to clear and Clearing Axis. My Carousel is attached to the gantry (Y Axis), there should no be any value for the y axis otherwise ...

cncsnw wrote: ↑Tue Jan 30, 2024 11:28 pm Here is a corrected Hardinge PLC program.

Thanks for pointing out the issues and providing a corrected PLC, it was indeed missing those critical pieces of logic. Should be corrected in future CNC12 V5.09+ when available.

Hi , my S1 tool. Clamped correctly sensor, i dont know which definition to assign the input as i only see toolunclamped as i am unable to spin my spindle which i am trying to sort out with hiteco , not sure if the sensors all have to be assigned or not as i have succesfully wired the other senses a...

In addition to what keith sent earlier, You need to set it to "Automatic Homing" so that CNC12 will try to seek to switches. In addition, since limitall isnt quite considered a homing input for the wizard, the cncm.hom file will need to be manually modified for this to work, so select &quo...

I tried adding G4 P1.5 to the next line under the M95 /4 and get no pause. Hello, Can you create a new fresh report and send it so we can see the modifications you made. Adding a G4 should cause a small pause. Taking your earlier provided report, i modified both your M10 and M11 with a G4 of 1.5 se...

Thanks Gary, I have a 4th axis so thats why I am using the g216 driver its a "indexing stepper driver" controlled by a couple relays. Keith has recommended it a couple times in the facebook group and Marty did a video on it, thats why I designed around this driver. I failed to mention the...

Good morning, When provided with the updated macro, I tried it immediately on Nov 13. Then I tried the latest 5.07.r15 on Nov 21 when it was provided to me on this forum. Neither worked. One caveats: V5.07.r15 sets Param 160 to 1. Then it fails asking for a tool0position.cnc file. I set parameter 1...