Are you sure you didn't have those "few beers" BEFORE you started?
Search found 2239 matches
- Fri Apr 26, 2024 4:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CL57T (3.0) Stepper Diver Issue (DB25 - Step Pull Up/Down Voltage Issue?) <resolved>
- Replies: 7
- Views: 283
- Fri Apr 26, 2024 10:06 am
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: OPCON and USB-BOB
- Replies: 81
- Views: 5281
Re: OPCON and USB-BOB
There are lots of joysticks for two axis moving, like in any RC control, or here is an example of a profile measuring machine in my job. But these are analogue, more throw, more speed, or in RC controls more travel speed depending on what is controlled. Uwe Uwe, I already asked about analog joystic...
- Thu Apr 25, 2024 9:12 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Enable outputs on Acorn
- Replies: 6
- Views: 170
Re: Enable outputs on Acorn
Yes, what he's talking about doing makes no sense at all. Hopefully he'll elaborate on the "why".
- Thu Apr 25, 2024 9:11 am
- Forum: Centroid Acorn CNC Controller
- Topic: Enable outputs on Acorn
- Replies: 6
- Views: 170
Re: Enable outputs on Acorn
I am using a DB25 interface for my stepper motor outputs. While using this are the enable outputs on H2 and H3 still active to use? If so are the active high or low for enabled? Please tell us what stepper drive you are using, most stepper drives are enabled by default and the ENA connection is not...
- Wed Apr 24, 2024 7:07 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Losing connection with open loop steppers.
- Replies: 6
- Views: 192
Re: Losing connection with open loop steppers.
Please post a CURRENT report from the machine. Anytime you have issues AND you have made machine changes you must post a new report so we can see your current settings. We can see how the machine is setup and look at your error log as to what the issue might be.
- Wed Apr 24, 2024 3:45 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Ping Test Failed (10.168.41.2)
- Replies: 11
- Views: 183
Re: Ping Test Failed (10.168.41.2)
Sorry ShawnM, I guess my original post wasn't completely clear. It did get to the point were I was unable to reconnect. I have gone back through and used the PC tuner, and worked through Tech Bulletin 270. I downloaded all windows updates and verified that the firewall is still off. I am getting th...
- Wed Apr 24, 2024 10:50 am
- Forum: Centroid Acorn CNC Controller
- Topic: Ping Test Failed (10.168.41.2)
- Replies: 11
- Views: 183
Re: Ping Test Failed (10.168.41.2)
I’m not sure how to add the report.zip file if I can’t connect to Acorn to create the file. I can’t check for com issues if I can’t connected to Acorn. The only thing I was able to check was the ping test. My bad, you stated a reboot fixed it so I was thinking you were able to connect again. I'd tr...
- Wed Apr 24, 2024 7:31 am
- Forum: Centroid Acorn CNC Controller
- Topic: Ping Test Failed (10.168.41.2)
- Replies: 11
- Views: 183
Re: Ping Test Failed (10.168.41.2)
Hi Lee, if I were a betting man I put money on com errors. Please post a current report from the machine as this is needed to see your machine configuration and error log. Please see this topic when asking for help and you should be running the latest version of CNC12 which is 5.08 https://centroidc...
- Tue Apr 23, 2024 7:43 pm
- Forum: Centroid Acorn CNC Controller
- Topic: mfunc6 disappearing after restarting CNC12
- Replies: 3
- Views: 89
Re: mfunc6 disappearing after restarting CNC12
Yeah, what Keith said.
- Tue Apr 23, 2024 6:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: mfunc6 disappearing after restarting CNC12
- Replies: 3
- Views: 89
Re: mfunc6 disappearing after restarting CNC12
There are setting in the wizard to tell CNC12 that you are using a custom M6, did you set these?