Centroid Community CNC Support Forum

Please post a CURRENT report from the machine. Anytime you have issues AND you have made machine changes you must post a new report so we can see your current settings. We can see how the machine is setup and look at your error log as to what the issue might be.

Sorry ShawnM, I guess my original post wasn't completely clear. It did get to the point were I was unable to reconnect. I have gone back through and used the PC tuner, and worked through Tech Bulletin 270. I downloaded all windows updates and verified that the firewall is still off. I am getting th...

I’m not sure how to add the report.zip file if I can’t connect to Acorn to create the file. I can’t check for com issues if I can’t connected to Acorn. The only thing I was able to check was the ping test. My bad, you stated a reboot fixed it so I was thinking you were able to connect again. I'd tr...

Hi Lee, if I were a betting man I put money on com errors. Please post a current report from the machine as this is needed to see your machine configuration and error log. Please see this topic when asking for help and you should be running the latest version of CNC12 which is 5.08 https://centroidc...

Yeah, what Keith said.

There are setting in the wizard to tell CNC12 that you are using a custom M6, did you set these?

And in that video the STEPPER drives are wired to the DB25. That's where they go. You may or may not need the enable lines wired up but you wont know until you wire up the step and direction lines and power up the drive with the motor connected to see if the stepper motor locks. All this information...

This behavior can still be a loose connection on the X axis and not necessarily a bad board. And since this is a mill I presume is there any chance that some fine, metal shavings got in the enclosure? Blow off the boards with some air when they are powered down. I dont use the C86 boards as they are...

I don't see your posted model number in the manual that you posted a link to. Are you sure you have the correct manual or did you type the model number incorrectly? In the manual you linked to it states that AI1 is for -10 to +10V and that's not the input you want to use. You need to use AI2 which i...

The only thing I think I can make out from that video is that you have X and Y setup backwards or you are confused about Cartesian coordinate system. X is left to right movement and Y is front to back.