Centroid Community CNC Support Forum

Thanks ShawnM you pulled together a lot of things I was seeing. As soon as I reinstalled a clean CNC12 file all of the evolving issues were gone. I am not doing anything including forum on Mac moving forward. NoFaultOut now works as intended. I will attach two new reports(hopefully that works on PC)...

Here we go. New install directly from thumb drive via my Win10 office Dell PC from Centroid download point. Checked all Win10 instructions to turn off Windows crap as per recommendations. Installed directly from thumb drive to Dell PC with Win10 pro(not online) all updates current. Set recommended e...

Scott, You got the wrong report file, I had checked that and toggled everything back to normal. I am currently getting a CNC12 Fatal Exception Detected error and the software terminates. I am going to download a fresh set of files and do a compete flush of old files then reinstall. Then I will try t...

I have the default VCP and Acorn_mill_plc.src. For the 12th time I will try that. Nothing happens I am guessing that since may buttons are spindle_cancel and spindle_start and I can't find those buttons in my Wizard I can't use the wizard to wire them. I guess I have a true VCP, it doesn't really ex...

Can you draw a schematic of what you are trying to accomplish? The Acorn outputs are double-throw, when one output is on, the other is off. It sounds like you are trying to reinvent the wheel. I am getting an error indicating that may schematic is in wrong format to post. It is a bit map. I am tryi...

I replied to your other post, but just another thought, do you happen to have OUT5 forced off/open? https://centroidcncforum.com/viewtopic.php?f=60&t=7685 That is possible. I assumed that the cnc12 had master control over internal functions and didn't suspect that the I/O function would overrid...

Trying to turn my spindle on and off using preprogramed green and red buttons on VCP. I want to use just one OUTPUT and let the CNC12 program logic XOR it using those two buttons and OUTPUT5. I realize this is pretty basic but I am into about 6-7 posts with no one understanding what I am trying to d...

Are you using the preprogrammed spindle on(green) off(red) buttons on the default VCP. And are you using them to turn one OUTPUT on and off that controls a contractor or similar? I know this is pretty basic but no o seems to be able to set back to this level of simplicity and show me how to do it. T...

CNCSNW Because I am not a code monkey my gramatical responses are not logically correct but try to step back out of code expert mode and help me get the green button to turn my spindle on and the red button to turn it off respecting the auto manual button above them. I can follow your answer as I po...

My schematic file is a .bmp