Centroid Community CNC Support Forum

I know these videos are not centroid specific, but it may shed some light on how things in conversational are working. (some real examples) Maybe not, but it doesnt hurt to watch and see.

http://s3.cnccookbook.com/GWEUConversat ... zards.html

Craig Hilliard wrote: ↑Sat Dec 21, 2019 1:24 am The proma 150 SD works great very simple to wire up
out of the box 30 minutes have it working

Is this how you wired it? Can you share more details about your setup and how you got it working? Maybe a video of it?

I just upgraded a WIN7 machine to Windows 10. NOTE: YOU MUST Have a legal legitimate version of Windows 7 on the PC with the KEY code. If you don't, don't bother.



Just for future reference if anyone needs too, Its not to hard to find the windows 7 activation #
https://www.lifewire.com/how-to ...

Britt,
Thank you so much for doing that.
I am going to give it a try.
I'll post back with results.

watch this video:
https://www.youtube.com/watch?v=F3SSgb_FnDA

I think around min 35 is what you want

use the attached spreadsheet made by Marty.

Here is a report file.

Ok did some quick testing.

I reset my revs per inch again
1" =5.093088039
this made it so a 1" move moves the x axis 1" exactly
bring the x axis out to far limit of travel at x9.5 and it is at 9.52461 24 and a half thou to much. This is consistent with all other times I have done this. Its always ...

Did you supply the stepper motors or were they on the machine?
What drives are being used?
What voltage power supply is being used?
Sorry, I can't spend the time to wade through 6 pages of posts.
Are you GAINING or LOSING?
X+ is AWAY from the spindle center line. That how you have the machine ...

I reset my x axis revs per inch and it is correct now. The new number for my x axis is 5.110149884.

I also checked my machines DRO against the 2" plunger DTI and they seem to be fairly accurate with each other.

My machines DRO says 2.009
dro.jpg

My DTI says the same thing
dti.jpg

So while I ...