Centroid Community CNC Support Forum

I tried to upgrade to CNC12 V5.30 and use the PLC program Centroid_ALLIN1DC_Mill_BP-Boss-r7.src. I now will get a F7 "Link on" button while homing.If I click on it before the homing sequence is finished, The Feedrate and Rapidrate will highlight on the screen (A different shade of blue) like "Link ...

Will it be in the next version?

See report

I have tried 1 thru 7 in p264. It still does not work. I am by far not a PLC expert however I don't see any logic in there for rapid override. I would think it would be similar to feed override logic.

How do you enable the Rapid Override and Link/Unlink with an Allin1Dc controller. I have the VCP figured out I think, at least it looks good but the rapid never changes. The feed override works well. I just can't figure the rapid out. I have read to select it in wizard VCP preferences but I don't ...

I recently upgraded to CNC 12 V5.20 and now have received this error.
Problem is I don't have a door switch.

The only way I can get the help screen to appear is to go into intercon thru the Cam button then Icn button then it loads the circle oneshot program. Then I can turn on the help screen.

I think I have a Custom VCP problem I can't figure out. This is on an AllinOneDC. I have parameter 192 set to equal 7 which brings up circular pocket one shot. I'm using the Aux5 button, Skin event 9, and changed the graphic. This is the first time I used it to actually cut with and I want to use it ...

Is there a way to set a "one shot" button in an AllinOneDC to run the threading cycle, (F5-Cam, F3-insert, F5-cycles, F8-thread) from the VCP?

I tried searching my .SRC file for SV_PLC_FUNCTION_24 and its only in there one place.
DoAux1Key_SV IS SV_PLC_FUNCTION_24.
I was looking for how each plc function works.