Centroid Community CNC Support Forum

After installing 5.06 (wpmp-4) on all axis x,y,z has only only one jog speed x1.
x10 , x100 fail to function.

Scales are of the RS422 type

RS422
Pin 1 2 3 4 5 6 7 8 9
Signal + Z - Z VCC Shield GND + A - A - B + B
Color Grey Brown Black Violet White Pink Red Green Yellow

Thanks Uwe, I will check if RS422 protocol

Acorn Six has three encoder inputs. Will they work with my current magnetic scales? Precision Matthews MagAct 200.

With three encoder inputs used, What about the spindle encoder ? Plan is to set up for mill/turn machine.

A wealth of information,Thanks all

The magnetic base for the TT-4 Tool Touch Off for a mill is great . How to mount it in a lathe chuck ? Does it have a threaded hole on the bottom for a stem ? Or is i possible to convert the KP-3 probe to a tool touch off device ? I have the KP-3 which works very well. Part setup on the mill and dig...

Is it possible to Update cnc 12 to newest version without doing bench test and keep all the current settings intact? The install instruction assume a new install ? When restore report is initiated , After v5.02 install ,cnc12 says it cant proceed, wrong version.

Thanks swissi,
will reinstall CNC12v4.82 Ultimate and retry.

KP3 Probe works now in Probe App and In Part set up (if diameter is under 1 inch). with a stall every so often had to hit cycle start to urge the probing to from stalled line in script. Has anyone had the same issue with diameters not selectable ? I checked in the wizard to see what probe distance w...