Search found 3864 matches
- Sun May 05, 2024 7:41 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Can Centroid Control this?
- Replies: 23
- Views: 261
Re: Can Centroid Control this?
Heidenhain does make signal converters. If I recall correctly, IBV100 and IBV600 series are for voltage-mode sine/cosine signals; and EXE100 and EXE600 series are for current-mode sine/cosine signals. However, those signal converters are generally more expensive than a basic rotary encoder, so they ...
- Sun May 05, 2024 2:34 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Can Centroid Control this?
- Replies: 23
- Views: 261
Re: Can Centroid Control this?
Hmm. Five-axis machine, and there in your picture are five connectors that look like Heidenhain M23 12-pin feedback plugs. Each plug bringing in nine wires, including four twisted pairs consistent with Heidenhain position feedback (BLU+RED, YEL+GRN, GRY+PNK, WHT+BRN). Because it is Heidenhain, there...
- Sun May 05, 2024 1:06 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Can Centroid Control this?
- Replies: 23
- Views: 261
Re: Can Centroid Control this?
Can Oak run without this encoder feedback? No. Neither can Heidenhain, unless all it does is move back and forth between limit switches. What exactly is a "Gate machine"? If the Heidenhain control had a DRO position display, and the ability to move to programmed positions, then there is p...
- Sun May 05, 2024 12:58 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn won't run g code/mdi < lathe G98/G99?>
- Replies: 19
- Views: 335
Re: Acorn won't run g code/mdi < lathe G98/G99?>
His Ahha programs will not run without some changes.
G90 is not appropriate there. All X and Z coordinates are absolute by default.
"F8" looks like an inches-per-minute feedrate. To use that, you need a G98 code.
G90 is not appropriate there. All X and Z coordinates are absolute by default.
"F8" looks like an inches-per-minute feedrate. To use that, you need a G98 code.
- Sat May 04, 2024 11:18 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn won't run g code/mdi < lathe G98/G99?>
- Replies: 19
- Views: 335
Re: Acorn won't run g code/mdi < lathe G98/G99?>
Have you tried G98, as Keith suggested?
For example:
... or, if you are going to use G1 in the default G99 mode, do you have the spindle running already, and have you given it a suitable per-revolution feedrate?
For example:
For example:
Code: Select all
G1 G98 F5 X1 Z1
For example:
Code: Select all
M3 S1200
G1 G99 F0.01 X1 Z-2
- Fri May 03, 2024 11:30 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Can Centroid Control this?
- Replies: 23
- Views: 261
Re: Can Centroid Control this?
You can probably run that system with Oak (+OpticDirect) in analog velocity mode. The drives need the tachogenerator feedback from the motors, to do their speed control. The Oak needs quadrature position feedback to know where the axis is. No, there is no way to usefully generate a quadrature encode...
- Thu May 02, 2024 1:12 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: mpu11 machine
- Replies: 4
- Views: 163
Re: mpu11 machine
Short answers: (1) The CNC program you posted, written out by the "mpu11wheeldig.txt" file currently on your control, assumes that PLC bit MEM72 (CNC variable #70072) will indicate when dry run mode is active. However, your PLC program sets MEM58 (CNC variable #70058) to indicate dry run m...
- Tue Apr 30, 2024 11:23 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Hardinge CHNC4 Retrofit
- Replies: 180
- Views: 76824
Re: Hardinge CHNC4 Retrofit
You could use the OpticDirect interface through the DriveBus connection on Allin1DC. OpticDirect can run third-party drives in either analog velocity mode or in position mode. You are not guaranteed synchronized movement with the Allin1DC axes if you use position mode, but for basic functional testi...
- Mon Apr 29, 2024 9:40 am
- Forum: Centroid Acorn CNC Controller
- Topic: Enable outputs on Acorn
- Replies: 9
- Views: 356
Re: Enable outputs on Acorn
I agree with Nigelo. Foremost, your emergency stop circuit should remove power from the stepper drivers. That should reliably ensure that the motors are free of power and torque whenever emergency stop is pressed.
- Sat Apr 27, 2024 2:25 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Issue with outside frame milling
- Replies: 12
- Views: 360
Re: Issue with outside frame milling
The Intercon program and graph are correct. It is tracing around the outside of a 2" x 3" rectangle, centered at X1 Y1.5. The toolpath (cutter center) is correctly offset to the outside by 0.1875 (the radius of the cutter you specified). Assuming that you did your part setup so that MDI &q...