Search found 4072 matches
- Wed Oct 30, 2024 3:46 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: m400, windows failure to load
- Replies: 48
- Views: 6361
Re: m400, windows failure to load
I do not have time, or enough information, to draw a picture or diagram of the connections in your M400 console. Maybe a text description will be useful. I am fairly certain your console has a micro-ATX motherboard, with a second ethernet adapter in an add-in card. Connections to the motherboard: - ...
This post has been liked 2 time(s).
- Wed Oct 30, 2024 8:47 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Ether1616 Changed?
- Replies: 6
- Views: 222
Re: Ether1616 Changed?
The PLCEXP1616 is the version for the RedOak. I think it might also work with AcornSix.
This post has been liked 1 time(s).
- Sat Oct 26, 2024 2:17 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Expending Outputs with a PLC
- Replies: 12
- Views: 668
Re: Expending Outputs with a PLC
If the infeed trigger, and run in response, need to be able to happen at any time while a CNC program is running, or also not while a CNC program is running, then it will have to be done in the PLC. Trying to do all PLC tasks with CNC macros limits you to doing those tasks either when no CNC program...
This post has been liked 1 time(s).
- Fri Nov 01, 2024 1:29 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC12 Mill, Lathe, Router, Plasma v5.20 is now available.
- Replies: 4
- Views: 354
Re: CNC12 Mill, Lathe, Router, Plasma v5.20 is now available.
Is it not a default procedure, to copy cncm.wcs ect. from a backup after update? No, not for Oak, Allin1DC and MPU11 systems. If a control does not need any of the new changes in the factory-supplied PLC programs or VCP skins, then you can just install CNC12 as an update over the existing installat...
This post has been liked 0 time(s).
- Thu Oct 31, 2024 7:38 pm
- Forum: Centroid Acorn CNC Controller
- Topic: WCS G54 Z axis not correct after setting part Z axis
- Replies: 12
- Views: 272
Re: WCS G54 Z axis not correct after setting part Z axis
Shouldn't the Z height be recorded in the WCS G54 Table as the distance from in my case Z home as a negative number? No. When you set Z Reference at Z home, and then measure tool offsets down from there, then set part zero with one of those tools, the Z value of your G54 offset will be the height o...
This post has been liked 0 time(s).
- Thu Oct 31, 2024 4:47 pm
- Forum: Centroid Acorn CNC Controller
- Topic: WCS G54 Z axis not correct after setting part Z axis
- Replies: 12
- Views: 272
Re: WCS G54 Z axis not correct after setting part Z axis
I would have to guess that something went wrong in your order of operations. It almost looks like you used the 123 block while setting the part zero, and not while measuring the tool offset. Your H1 tool offset is ca. -11.4", which would appear to be the distance down from home to the surface o...
This post has been liked 0 time(s).
- Thu Oct 31, 2024 2:11 pm
- Forum: Centroid Acorn CNC Controller
- Topic: WCS G54 Z axis not correct after setting part Z axis
- Replies: 12
- Views: 272
Re: WCS G54 Z axis not correct after setting part Z axis
Where was the tool, relative to the part surface and the 123 block, when you took each of those two screen pictures?
This post has been liked 0 time(s).
- Wed Oct 30, 2024 7:17 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Pitfall in v5.20 mill update: WCS file lost
- Replies: 2
- Views: 145
Pitfall in v5.20 mill update: WCS file lost
Oak, Allin1DC and MPU11 users should be aware: installing the v5.20 update will overwrite your WCS file with a new, blank file. That will remove your software travel limits; zero out any custom return points (such as a fixed tool setter location, or the G30 Z coordinate for an umbrella or swing-arm ...
This post has been liked 0 time(s).
- Wed Oct 30, 2024 2:33 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: M15DRV1 board level troubleshooting
- Replies: 10
- Views: 1010
Re: M15DRV1 board level troubleshooting
It could be a power supply issue, but that is a little unlikely because the PLC inputs on this board use the same 5VDC supply that runs the logic circuits and the computer motherboard assembly. If that supply were going out, you would have system-wide problems (e.g. PC lockups, or at least "401...
This post has been liked 0 time(s).
- Sat Oct 26, 2024 2:28 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Drill Bank code
- Replies: 4
- Views: 366
Re: Drill Bank code
No. On Centroid controls, outside of the arguments list of a G65 call, 'B' is only used as an axis address (typically a rotary axis, aligned with Y). Calling tools from a drill bank typically requires some creative CNC macro programming, probably with some support on the PLC side. I infer from your ...
This post has been liked 0 time(s).