Centroid Community CNC Support Forum

Thank very much. now works perfectly.

Hello Chaz.
Thanks for you reply.Unfortunately the centroid team still hasn't solved the problem.

Hi
Can anyone tell me if a solution to the "distance to go" issue as described in this thread and above has been found, other than to add an M0 in the code ?
I'm trying to get a home built ATC working with this macro and found this thread after hitting the exact same problem , everything works fine ...

report_3403DE6E9763-0724192320_2020-03-07_09-19-14.zip Hi
Can anyone tell me if a solution to the "distance to go" issue as described in this thread and above has been found, other than to add an M0 in the code ?
I'm trying to get a home built ATC working with this macro and found this thread after ...

And here is the code we are using. Running this via MDI always 'resets' the distance to go to 0 for the A Axis. Running it in a program, does not, so the calcs do not remain consistent. M0 in the code, or in the macro, solves the issue but the machine will wait for cycle start on tool change ...

Centroid_Tech wrote: ↑Wed Jun 13, 2018 2:51 pm Unfortunately, there isn't. The only way around this issue that I can think of is the way that you have already determined using the M0.

hello, how i can resolve this problem.
I need controlling the turret without stops.
you have some idea?
Thanks in advanced.
luis Vega.

Thank you.

Hello experts,
I want to change mach3 with centroid acorn. Because mach3 does not support turn threading with encoder synchronized and rigid tapping.
I have a small lathe with 6 position unidirectional automatic tool changer powered with stepper motor connected to 4 axis and have a limit switch for ...

With mach3 it is very easy to do it. with acorn I do not know how to do it, no I found a manual of the macro.

With mach3 it is very easy to do it. with acorn I do not know how to do it, no I found a centroid macro reference.