The power supply is 48V as you remember. 6.7A I believe those Haydon Kerk motors draw 2 amps, so 6.7A on the PS should be good I will look into limit switch upgrades. Should be plenty of choices but if you have a known accurate/reliable recommendation I welcome it. I prefer proximity sensors. I wou...
Custom ordered in 2021, this 12,000 rpm four pole spindle is designed for milling metal and plastics, it has a drawbar sensor and encoder added as options. Coupled with an 800 htz Hitachi VFD and controlled via sensorless vector control it has great low rpm performance. Unit has 100-120 hours on it,...
Your project is more than doable. I have done a small format drilling machine with that exact combo and would suggest, that since you don't need, and therefore don't need to pay for, all of the IO features on the MX-4660. I would recommend the LeadShine DM-542E at $35 each ($140 total) rather than t...
Gene... In theory what you wish to do is possible, but in reality, very difficult for the inexperienced. Here are the reasons: 1) Without gear reduction you would have a 0.318.. turns ratio. Far below what is required for Centroid. That direct drive alpha was so bad that SB traded them out for gearm...
New for 2024, a modular designed control box which virtually eliminates the need for user connections inside the control box. Originally designed as a Teknic ClearPath upgrade controller for AVID & ShopBot owners, the use of AVID and CNC Depot compatible modular conventions adds the flexibility ...