Search found 8669 matches

by martyscncgarage
Wed Aug 04, 2021 4:56 pm
Forum: Centroid Acorn CNC Controller
Topic: Huanyang HY03D023B, 12000RPM Max Speed
Replies: 23
Views: 184

Re: Huanyang HY03D023B, 12000RPM Max Speed

It does not sound like you have the VFD configured correctly. Did you move the jumper on the VFD per the notes?

Please create a sketch on how you have the VFD wired to Acorn
by martyscncgarage
Wed Aug 04, 2021 1:51 pm
Forum: Centroid Acorn CNC Controller
Topic: Huanyang HY03D023B, 12000RPM Max Speed
Replies: 23
Views: 184

Re: Huanyang HY03D023B, 12000RPM Max Speed

From my note sheet I posted. PD005 should be set to the MAX frequency to achieve the highest speed. Try 180 and see what that gets you.
by martyscncgarage
Wed Aug 04, 2021 11:38 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Upgrading 1984 Wells Index 820 with Allin1DC
Replies: 219
Views: 9635

Re: Upgrading 1984 Wells Index 820 with Allin1DC

Thanks Marty. I was curious about the markings on the aux contactors. They look like capacitor markings, but them being switches makes more sense. Am I reading them correctly that the two bars indicate normally open and the two bars with a slash across them is normally closed? Mark Yes on the conta...
by martyscncgarage
Wed Aug 04, 2021 9:08 am
Forum: Centroid Acorn CNC Controller
Topic: tool offset lathe / touch probe
Replies: 2
Views: 52

Re: tool offset lathe / touch probe

And always post a fresh report when asking for support. It has your logs and your machine configuration settings.
Marty
by martyscncgarage
Wed Aug 04, 2021 9:08 am
Forum: Centroid Acorn CNC Controller
Topic: tool offset lathe / touch probe
Replies: 2
Views: 52

Re: tool offset lathe / touch probe

My advice to you is read the Lathe Operator's Manual found on this page:
https://www.centroidcnc.com/centroid_di ... nuals.html

Search YouTube for this term "Setting up tools Centroid Lathe"
by martyscncgarage
Wed Aug 04, 2021 9:04 am
Forum: Centroid Acorn CNC Controller
Topic: Magnaturn South Bend Lathe-Acorn
Replies: 4
Views: 68

Re: Magnaturn South Bend Lathe-Acorn

Hello, I have started retrofitting my SBL to acorn. Already did a retrofit with another controller and was not pleased with how it works as a lathe so most of the wiring will work with Acorn setup. So far Acorn is much easier to set up and configure and the software/conversational side is what iam ...
by martyscncgarage
Wed Aug 04, 2021 9:00 am
Forum: Centroid Acorn CNC Controller
Topic: Huanyang HY03D023B, 12000RPM Max Speed
Replies: 23
Views: 184

Re: Huanyang HY03D023B, 12000RPM Max Speed

My notes on the HY Inverter attached.
Be careful, there are Chinese knock offs of the HY inverter. Usually a give away is no potentiometer on the front panel.
What exactly does the inverter label say?

Consider a TD200 from factorymation.com
by martyscncgarage
Wed Aug 04, 2021 8:55 am
Forum: Centroid Acorn CNC Controller
Topic: Acorn connectivity issues
Replies: 10
Views: 87

Re: Acorn connectivity issues

Please post a picture of your Acorn and associated wiring. Please tell us about the PC Are you using the shielded cable that came with Acorn? Please post a fresh report F7 Utility, F7 Create Report When installing CNC12, did you choose the correct ethernet card? Why did you have to manually set the ...
by martyscncgarage
Wed Aug 04, 2021 8:25 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Upgrading 1984 Wells Index 820 with Allin1DC
Replies: 219
Views: 9635

Re: Upgrading 1984 Wells Index 820 with Allin1DC

Top picture shows auxillary contact blocks. They actuate with the relay.

Second picture shows a suppressor across the contactor coil. The coil is 120vac