Search found 177 matches

by Sportbikeryder
Mon Jun 06, 2022 9:31 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: MS 7309 as replacement for MS 7142 Motherboard
Replies: 2
Views: 879

Re: MS 7309 as replacement for MS 7142 Motherboard

Thanks for the response. I am running Linux 2.61 and CNC 10 Mill 2.63, and the CF card is smaller than 4gb. I'm now not certain it is a MB issue as I was able to manually start it by shorting the power wires (I may just install a physical power button on the backside of the console.). Same issue hap...
by Sportbikeryder
Fri Jun 03, 2022 12:16 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: MS 7309 as replacement for MS 7142 Motherboard
Replies: 2
Views: 879

MS 7309 as replacement for MS 7142 Motherboard

Unit is a Uniconsole-2 CNC 10 linux with suspected motherboard issue.

Is MS 7309 a suitable replacement for MS 7142 motherboard?

John
by Sportbikeryder
Wed May 25, 2022 11:38 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

These connectors require a removal tool.woth a slot to go around the wire. The Ebay style posted, while useful for many other connectors, don't work for these. https://www.ebay.com/itm/274721624359?hash=item3ff6af5127:g:ytoAAOSwEbhgQrWw&amdata=enc%3AAQAHAAAA8DzsSYXDdP2nWk%2FEUYO46Zew%2BY1tjIsUTj...
by Sportbikeryder
Wed May 18, 2022 9:57 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

To follow up, I have purchased and successfully used a 910672 style tool for this connector.
by Sportbikeryder
Mon May 16, 2022 10:28 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

Ironically I think it is this tool that is used for the small connector rather than the front inserted tool. The contacts themselves are HD20 amplimite contacts. https://www.mouser.com/datasheet/2/418/5/NG_SS_408-9404_D-1150883.pdf Also this tool: https://www.alliedelec.com/m/d/2c99cf6adf4d5397d7f0a...
by Sportbikeryder
Mon May 16, 2022 8:11 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

It appears that the AMP tool you mention is not split by looking at the instruction sheet for the tool because you use it from the front side. I'll see if I can find a part number for the one I have, I've had it for years. Yeah, I have a few tools here, with and without splits (not necessarily sele...
by Sportbikeryder
Sun May 15, 2022 11:16 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

Yes, the extraction tool is used from the back side of that circular connector as you noted. It is the split you you mention. I use those tools regularly for aviation wiring as aircraft use similar pins and connectors for some avionics. Is the amp 305183 series that was mentioned split or do you ha...
by Sportbikeryder
Thu May 12, 2022 7:40 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

I'm not really sure how the front insertion tool could be used. I believe this requires a split style tool inserted from the rear, around the wire.
20220512_193656.jpg
20220512_193641.jpg
by Sportbikeryder
Thu May 12, 2022 10:06 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Re: Circular Connector tool(s)

Pendant connector. AMP cpc size17. I have seen documents relating to the extraction tool, however I have also seen multiple tools referenced for removal of the pins. Some of them don't really look like they would be suitable for this connector. John Screenshot_20220512-100245_Chrome.jpg MPG04b.jpeg
by Sportbikeryder
Tue May 10, 2022 11:52 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: Circular Connector tool(s)
Replies: 13
Views: 3596

Circular Connector tool(s)

Is a part number for the tool required for extraction of pins on the Circular connectors used on Centroid pendants / probes, etc available?

I had an issue with pendant wiring, and while I am able to repair, I am not certain as to which tool is required to extract the pins.

John