Centroid Community CNC Support Forum

thanks, i just wanted more details before i go off and do a big write up guessing at the goal that may not be applicable. as often i find that jumping to conclusions about editing the PLC program is completely unnecessary when you find out specifically what the user is trying to accomplish. :D i sti...

fyi...both the db25 and the screw terminal output step and direction at same time. the selection in the wizard is to get the direction set correctly since there is a cw/ccw flip between db25 and screw terminals. im sure chuck will give you some more advice, in meantime to help us help you better, pl...

the reports shows you are using windows 7. this OS is not supported. use Windows 10 or 11 and follow the setup guide to configure Windows for CNC use. Also the PC being used as a CNCPC does not meet the minimum required PC specs review all the info on this page. https://www.centroidcnc.com/centroid_...

report_60E85B9CEC25-1214226725_2023-06-01_14-45-46.zipOk here is the latest report. Most everything works other than the homing and Z zeroing. luke, hello. need more description on what you mean by homing and z zeroing doesn't work. make a video of the issue so we can see what you are doing. -keith

Thank You Uwe I'm heading to the shop at about an hour and should have better information when I return. Regards, Steve Steve, hello. we re tested with your report.zip here on our end and could not find any issues with CNC12/plc/wizard . a review in general for VCP spindle operations... When enteri...

kman1967 wrote: ↑Wed May 31, 2023 8:20 pm Turn on an input when a vision system detects something wrong with an operation

and what would you like CNC12 to do when that input closes?

and if i knew more about the system/machine..would be really helpful.
http://centroidcncforum.com/viewtopic.php?f=60&t=1043

follow the instructions please. located on the download page.
https://www.centroidcnc.com/centroid_di ... loads.html

starts on page 7
https://www.centroidcnc.com/centroid_di ... ctions.pdf

kman1967 wrote: ↑Wed May 31, 2023 3:49 pm Right now I would just like to add custom names.

ok, please give an example

we used laser grbl to generate laser engraving code, info is on the centroid acorn laser page.

https://www.centroidcnc.com/centroid_di ... r_cnc.html

yes, pm me