carl,
hello.
which way does the table move when you press x+ jog key
Search found 7328 matches
- Fri Apr 26, 2024 2:34 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Issue with outside frame milling
- Replies: 4
- Views: 75
- Thu Apr 25, 2024 2:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Video Walkthrough of How I Use the Acorn
- Replies: 4
- Views: 146
Re: Video Walkthrough of How I Use the Acorn
thanks for posting, great video. got to get you on a Centroid Probe. Adam has also done one of the best videos i've seen on how to use probing to pick up "hard" locations on a part and reverse engineer it in the CAD/CAM system using the location data he got from putting the part in the CNC...
- Thu Apr 25, 2024 1:57 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Remote heartbeat
- Replies: 5
- Views: 129
Re: Remote heartbeat
you'll find once you get the machine configured and running you never look at the heartbeat again.
- Wed Apr 24, 2024 6:33 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
- Replies: 3
- Views: 122
Re: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
Right on!
Right now we have not tested a C2000 yet on the Ethercat daisy chain, but will be testing a Delta M300 via as soon as they ship it to us.
Right now we have not tested a C2000 yet on the Ethercat daisy chain, but will be testing a Delta M300 via as soon as they ship it to us.
- Wed Apr 24, 2024 5:02 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Homebuilt tool touchoff block(resolved)
- Replies: 5
- Views: 192
- Wed Apr 24, 2024 5:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Delta ASDA-B2 ACORN WIRING INFORMATION
- Replies: 28
- Views: 671
Re: Delta ASDA-B2 ACORN WIRING INFORMATION
Al009 just means the position error exceeds what is set (i believe it is normally 60k pulses; look in the manual; it is some a parameter). This generally happens if the drive is not tuned and/or it is put under recessive stress where it does not have enough power to overcome that. You can monitor i...
- Tue Apr 23, 2024 6:21 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Centroid acorn router machine build
- Replies: 14
- Views: 748
Re: Centroid acorn router machine build
sorry i can't give this kind of advice, it is up to you to determine the proper amp ratings of wire, contactors, disconnects, relays etc.. usually the VFD manual will tell you what and how to size wire fuses/breakers etc and there are plenty of VFD videos on line. the safety aspect of the project is...
- Tue Apr 23, 2024 6:17 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Hybrid stepper motor error
- Replies: 3
- Views: 131
Re: Hybrid stepper motor error
sounds like the driver is faulting out and releasing power, check for binding/load on motor when holding position and or force that would cause it to be pushed off the commanded hold position. does the drive have a LED that indicates a fault?
- Tue Apr 23, 2024 6:15 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acornsix yaskawa sigma2 issue!
- Replies: 19
- Views: 544
Re: Acornsix yaskawa sigma2 issue!
running in one direction is usually a wiring error
- Tue Apr 23, 2024 6:12 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn won't run g code/mdi < lathe G98/G99?>
- Replies: 4
- Views: 146
Re: Acorn won't run g code/mdi
probably trying to command a G1 with an encoder installed
read up on G98 and G99 in the operator manual
but who knows i left my crystal ball at home.
read up on G98 and G99 in the operator manual
but who knows i left my crystal ball at home.