Centroid Community CNC Support Forum

having a button that closes the input is the easiest to under stand in this case. for cyclestart2,feedhold2 buttons in the wizard i have my button input set green which = do the logic assigned to the input when input is made. my button closes the input when depressed. when button is depressed the LE...

The Thread angle is the compound angle, not the angle of the insert. Compound angle controls the angle that the control adjust how the cutting on the insert is done. 59 (29 1/2) adjusts the cut so most of the cut is done on the leading side of the insert. With compound angle of 0.0 the insert will ...

have you asked Teknic? i hear they are good with support.

yeah, put them in any folder you want. no problem.

sounds good. the tool library in cnc12 is going to get a make over in v5.2 for mill and router 1st stage of this make over will be in v5.18 which will be a router only release . That is not fair, I have no router yet 🤣 Tool Lib is for me less a problem than not having second independent spindle wit...

great info, once finalized, please post latest working configurations and maybe a video demo. and i will gather and compile info into a Tech Bulletin and create a centroid schematic for others to use in the future. Was a tech bulletin on this ever made? I could only find one for SDSK motors. Trying...

when i mill 3d shapes on a router i set all the backlash compensation values to 0.0000 . The tool path i use does a turn around 'off the part' and therefore the backlash doesn't come into play. having it on in this case sometime causes issues when 3D surfacing like you are doing.

Question: What is causing an inconsistent radius after milling a circle or arc? Answer: Mechanical lash in the machine or improper backlash compensation setting... Solutions: • Adjust software lash if less than 0.001". See TB037 - measuring machine lash • Repair mechanical if lash is over 0.001...

out of round holes could be the overall turns ratio not being correct.
looks like you have metric screws 10 mm pitch. i'd go back to 2.54 rev/in and do you test cuts again.
are servos 1:1 with the screws?

backlash and something loose can also cause a shift when cutting, so review that as well.

right on! thanks for sharing, nice work on the machine.
foiling is really cool!