Centroid Community CNC Support Forum

battery type makes a difference as well. don't use rechargeable batteries.

Canned SSV has been committed and will be in the next release of CNC12 CNC12 parameters for SSV P981 : Time for Spindle Speed Variation to complete a Full Cycle in Seconds. P982 : Amount of Speed Variation (Example; S = 500, P = 100, Speed would be 400 or 600 depending on where its at in the cycle)....

Hey all! The servos have arrived. And a few hours later it was all working! Now I need to nudge Keith and the centroid team to get the Delta C2000(+) working with ethercat :oops: Next step will be to make the panel for my e-cabinet. Mount it all in there ... and get the machine moving. -- I will up...

carboncymbal wrote: ↑Wed May 29, 2024 1:56 am Is it possible to initiate the various homing procedures in the delta B3A drives? Specifically, is it possible to home to the physical hard stop?

why would you want to do that? with absolute encoders you "home" once every ten years

can you try a different computer?
all you have to do is run the PC Tuner on the new computer and copy over the c:\cncm folder from the old computer to the new one.

great. now i would try a different PC. run the PC tuner on it and simply copy the CNCM directory from the existing PC to the new one (no need to reinstall v5.1) and run your test file again. if problem still exists, they evidence is pointing more and more to motor/drive related issues (not tuned pro...

the license is not tied to the pc so no problem provide your customer with a copy of the license file. easy peasy i would provide the customer with an entire copy of the cncm or cnct folder so all they have to do is copy that to the new PC (after running the PC tuner) and they would be up and runnin...

please install and configure the latest version of CNC12 v5.1. so we are all testing and working with the same software. when posting a video , please always include a copy of the actual g code file that is being used in the video. video looks like classic data starvation. while gearing down will he...

Not seeing any tiny .002" moves... Unless I don't understand how these arc moves work. Keith any ideas on this? as will almost all issues the symptoms can be caused by a number of different factors, if you have eliminated excessively short vectors and are using full size lines and arcs then th...

post the intercon file as well please.