Search found 7289 matches
- Thu Apr 18, 2024 7:02 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Delta ASDA-B2 ACORN WIRING INFORMATION
- Replies: 8
- Views: 142
Re: Delta ASDA-B2 ACORN WIRING INFORMATION
What exact model ASDA-B2 drives do you have? It will say on the nameplate sticker. Please post a picture of the connector and nameplate sticker if you can. I am curious because all of Delta's documentation for ASD-B2-xxxx-B (standard spec) drives shows a 44 pin CN1 connector. The ASD-B2-xxxx-F spec...
- Thu Apr 18, 2024 6:19 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Touch probe
- Replies: 10
- Views: 496
Re: Touch probe
ok sounds like we are taking about probing and not digitizing )
sounds like you just need to locate these features relative to another point on the object. then you will know where to place the geometry in the cad model. this is pretty easy.
sounds like you just need to locate these features relative to another point on the object. then you will know where to place the geometry in the cad model. this is pretty easy.
- Thu Apr 18, 2024 2:48 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: Centroid Operator Control Panel Interface Board: USB-BOB
- Replies: 25
- Views: 996
Re: Centroid Operator Control Panel Interface Board: USB-BOB
try to keep the kit under $250, its tough these days!
- Thu Apr 18, 2024 2:38 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
- Replies: 5
- Views: 128
Re: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
SIGMA 2 SYSTEM ??? acorn centroid with delta asda-b2 wiring system problem . went cnc 12 and acorn is open , and I power up the the motor drive the x and z (only 2 axes are powered up for now) the motor start moving by it self. What rough with acorn??? hi, disconnect all but one delta drive from th...
- Wed Apr 17, 2024 3:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Multi Spindle CNC Router control options
- Replies: 16
- Views: 258
Re: Multi Spindle CNC Router control options
you'll have to try it or ask the guy who wrote the post! i don't use Fusion.
- Wed Apr 17, 2024 3:24 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Breaking news! Delta B3A ethercat drive is now running with Hickory and we are doing final tests on a machine
- Replies: 5
- Views: 185
- Wed Apr 17, 2024 3:24 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Hickory/Delta ASD-B3A-E and B3-E Setup & Tuning Guide
- Replies: 0
- Views: 30
Hickory/Delta ASD-B3A-E and B3-E Setup & Tuning Guide
Hickory/Delta ASD-B3A-E and B3-E Setup & Tuning Guide
https://www.centroidcnc.com/dealersuppo ... ds/330.pdf
https://www.centroidcnc.com/dealersuppo ... ds/330.pdf
- Wed Apr 17, 2024 2:35 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Touch probe
- Replies: 10
- Views: 496
Re: Touch probe
Is there a source to learn how to use the KP-3 Touch Probe to digitze a part? I need to make a 3d model then mill some slots and engrave on it. the digitizing routines built into cnc12 are covered in the CNC12 Mill operators manual. while they are very easy to use, the digitizing to cutting a part ...
- Wed Apr 17, 2024 2:31 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Multi Spindle CNC Router control options
- Replies: 16
- Views: 258
Re: Multi Spindle CNC Router control options
its best to have the cad/cam system use short vectors and stick to g1's and g0's which is common these days.
then you can get any type of "move" to work in any plane with any other axis.
then you can get any type of "move" to work in any plane with any other axis.
- Wed Apr 17, 2024 2:21 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 v5.1 RC#6 Mill, Lathe, Router, Plasma RC5 now available for download and testing.
- Replies: 5
- Views: 128