Centroid Community CNC Support Forum

try to keep the kit under $250, its tough these days!

SIGMA 2 SYSTEM ??? acorn centroid with delta asda-b2 wiring system problem . went cnc 12 and acorn is open , and I power up the the motor drive the x and z (only 2 axes are powered up for now) the motor start moving by it self. What rough with acorn??? hi, disconnect all but one delta drive from th...

you'll have to try it or ask the guy who wrote the post! i don't use Fusion.

Hickory/Delta ASD-B3A-E and B3-E Setup & Tuning Guide

https://www.centroidcnc.com/dealersuppo ... ds/330.pdf

Is there a source to learn how to use the KP-3 Touch Probe to digitze a part? I need to make a 3d model then mill some slots and engrave on it. the digitizing routines built into cnc12 are covered in the CNC12 Mill operators manual. while they are very easy to use, the digitizing to cutting a part ...

its best to have the cad/cam system use short vectors and stick to g1's and g0's which is common these days.
then you can get any type of "move" to work in any plane with any other axis.

usinart wrote: ↑Wed Apr 17, 2024 10:26 am Ok as this moment nothing as change .the axe that are plugin are moving as soon the power arrive.
need help .
thanks

is this the sigma 2 system? need photos and more information to help.

I'm now wondering if it would be worth putting an RPM sensor in this setup too. I assume Acorn could detect the commanded RPM vs the actual RPM and compensate? Nope, CNC12 does not close the loop on spindle speed control. CNC12 will show you the actual RPM via the encoder feedback but, its up to yo...

ok. how about lots of detailed photos of your setup? might help us out so we can see what you got going on.
#3 here tells you how to put hi res images in an online photo album
https://centroidcncforum.com/viewtopic.php?f=60&t=1043