related.
Search found 7334 matches
- Fri Apr 26, 2024 5:08 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Lathe Work/CNC12 and Post Processing
- Replies: 4
- Views: 41
- Fri Apr 26, 2024 5:06 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Lathe Work/CNC12 and Post Processing
- Replies: 4
- Views: 41
Re: Lathe Work/CNC12 and Post Processing
CNC12 runs on G code not cad data so yes if you are using a cad/cam system you will need a post processor. i would suggest start with Intercon. to get the basics down. then you can move onto the cad/cam and post processor world can your parts be made using Intercon? https://youtu.be/rEY3uKOuPZQ?si=q...
- Fri Apr 26, 2024 3:52 pm
- Forum: Centroid Acorn CNC Controller
- Topic: AcornSix - Zri Homing with linear scales
- Replies: 18
- Views: 633
Re: AcornSix - Zri Homing with linear scales
thanks for reporting back
- Fri Apr 26, 2024 3:51 pm
- Forum: Centroid Acorn CNC Controller
- Topic: CL57T (3.0) Stepper Diver Issue (DB25 - Step Pull Up/Down Voltage Issue?) <resolved>
- Replies: 7
- Views: 268
Re: CL57T (3.0) Stepper Diver Issue (DB25 - Step Pull Up/Down Voltage Issue?) <resolved>
thanks for reporting back
- Fri Apr 26, 2024 3:48 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Video Walkthrough of How I Use the Acorn
- Replies: 7
- Views: 172
Re: Video Walkthrough of How I Use the Acorn
The acorn is quite a good value tbh. Edingcnc starter set is also around the 360 mark. If one opts for linuxcnc and wants to use a mesa card (like most people do) you'll also quickly spend 200+ shipping + a whole lot of your time. GBRL is cheaper but also much more limited. So overall it is quite a...
- Fri Apr 26, 2024 3:47 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Video Walkthrough of How I Use the Acorn
- Replies: 7
- Views: 172
Re: Video Walkthrough of How I Use the Acorn
Yes a very good introduction to the Centroid Acorn. One thing I don't agree with in the video is Adam stating that the Acorn system is expensive. If one values their time at all the Acorn is a no brainer. The ease of installation and support is priceless I think. The combination of hardware and sof...
- Fri Apr 26, 2024 2:34 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Issue with outside frame milling
- Replies: 8
- Views: 106
Re: Issue with outside frame milling
carl,
hello.
which way does the table move when you press x+ jog key
hello.
which way does the table move when you press x+ jog key
- Thu Apr 25, 2024 2:00 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Video Walkthrough of How I Use the Acorn
- Replies: 7
- Views: 172
Re: Video Walkthrough of How I Use the Acorn
thanks for posting, great video. got to get you on a Centroid Probe. Adam has also done one of the best videos i've seen on how to use probing to pick up "hard" locations on a part and reverse engineer it in the CAD/CAM system using the location data he got from putting the part in the CNC...
- Thu Apr 25, 2024 1:57 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Remote heartbeat
- Replies: 5
- Views: 133
Re: Remote heartbeat
you'll find once you get the machine configured and running you never look at the heartbeat again.
- Wed Apr 24, 2024 6:33 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
- Replies: 3
- Views: 132
Re: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
Right on!
Right now we have not tested a C2000 yet on the Ethercat daisy chain, but will be testing a Delta M300 via as soon as they ship it to us.
Right now we have not tested a C2000 yet on the Ethercat daisy chain, but will be testing a Delta M300 via as soon as they ship it to us.