Centroid Community CNC Support Forum

You can use any tool to set your WCS Z0 as long as you ALSO have that tool's height offset active as well. If you just load the tool and not the offset, or you don't load the tool at all, then your part offset will be wrong.

Pro has same CSR as ultimate. Ultimate adds scale feedback, unlimited digitizing, and lathe C axis,.

Double post - https://centroidcncforum.com/viewtopic. ... 319#p86319

You can select the direction for the measurement points, but the rotation symbol will always appear on the X DRO.

Section 4.4 in the Mill Operator's Manual.

If you are already doing manual tool changes, post each tool path as a separate file. Then, just do the tool change before running the file.

Distance to go shows that amount of movement remaining in the current G-code line. It does not show the amount of material to be removed from the part.

Do you have cutter comp turned on in the wrong direction? Posting your Intercon file would let us see.

If you disable drives on an Acorn, you will have to re-home everytime you re-enable the drives. Acorn is an open-loop system.

Some in the past have used fiber optic light guides to reposition the heartbeat.