Centroid Community CNC Support Forum

Reinstalled the CNC12 software, and did not fat finger the PLC selection this time and it is up and running, the servo cable was not tightened down good enough either, it has been 5 years since I put the dude together. Now I need to search the forum for how to hook up 3rd party tool touch off probe ...

Fascinating, I will reinstall this weekend and pay closer attention to the PLC issue, that confuses me.
and as to the encoder issue, when I reinstalled CNC11 and restored from report all functions as it should again so that is baffling as well

Thank you for your prompt response!!

Greetings all, I am having the following issue with my cnc 11 to cnc 12 upgrade I have included the report.zip from before the upgrade, and the report008dc111...... from after the upgrade. the issue is as follows, before the upgrade I would get the "Machine Setup Not Completed" Screen, the...

You know what Marty, I don't like people yelling at me, even on a forum post. So Ill tell you what I am going to do, I will solve this riddle myself like I always do and I won't be back here to trouble you all again.

Cheers

I am having trouble with the Soft Limit values in the table resetting themselves to zero after I shut down the computer and bring it back up I am using Centroid 12 v 4.64 on a home built router table I have been using Centroid for several years now, with my all-in-one setup on my Boss 6 so I am fami...

well i went out and checked my motors this morning before i went to work and they are rated for 180 Volts so i should be in good shape. I am going to actually put together an entire video of the machine, control board, vfd wiring etc. i want to be able to give others a good resource to go to for upg...

Solved it myself. for all that may in the future sometime encounter this problem. here is the solution while in the ALT & i monitoring screen, if you press CTRL + ALT + i while on the signal inputs it will invert the signals, so i changed 9 and 10 to green an viola it all began to work And i don...

ok after further reading it appears that a "solid" 1 in LED1 means the board is functioning properly, and it is only when it is blinking that there is an error. i have checked and rechecked the parameter setting to verify they are correct. they are as follows 35=0 148=0 170=5 178=3 332=255...

This is what is occurring. on the first check, after pressing ALT % i and getting the input output screen, 9, 10, 11 should be lit green, but they are not. only 11 is green. secondly output one is not lit, there is no continuity between the "no fault" terminals. the All-In-One board LED is...

i am having the same issue only i am using Centroid Software. Please help if you can