Centroid Community CNC Support Forum

Hi, I have changed my spindle speed from 2500 to 5000 RPM via pulley changes.
I changed the spindle speed setting in the Wizard from 2500 to 5000 RPM, and saved the configuration and shutdown.
On opening the Acorn program I loaded the Spindle Bench Test program and followed the instructions in Marty ...

Everything was working fine in v4.12. nothing mechanically changed, just a straight update.

All the settings are exactly the same in V4.14 as in V4.12.

There must be a parameter that can be changed to alter the clearance distance. I've looked through the parameter list but I can't seem to find the ...

As an update, I've just checked the Homing Sequence by tripping the Home Limits by hand and the machine goes through the Homing Sequence as expected.

I checked the manual and M92 says that the Limit Switch must clear within 0.25 inches.

I have long arms on my limits and they require more than 0.25 ...

I have just installed CNC12 V4.14 and cannot get the Z Home Limit to come back to the Normally Closed position to enable the Homing Sequence to got to the next Home Limit (Y).

When I start the Home Sequence routine the axis will move in the Z direction, trip the Z Axis Home Limit and then starts to ...