Centroid Community CNC Support Forum

Well now, that is quite some systems test! Thought it would home it a few times and be on my way. LOL :P A few tweaks on software limits and a motor 90' turn- Passed! that that is a great feeling. My reign of terror on your BB is done I fear ;-) Time to put our first steel job in the next day or two...

Thanks for the feedback. I have solved everything. All settings and issues put into Original post. Now I need to calibrate this w/ the Mill itself somehow. as it is a Variable speed Mill, I guess I need to remove the gear/clutch or what ever it is in the head! ! Man... And I thought I was done w/ he...

Quick item on the use of a Hunyang VFD. While I'm not exactly happy w/ the unit due to so many manual inconsistencies and just plain trial and error.... They are everywhere these days. This post updated ongoing regardless of threads below. I am trying to keep this 1 post updated w/ all my settings o...

Thanks!! Besides that part I also had a few issues w/ setup of limit and home settings and order. All good and I've homes along just fine. This was resolved by getting my ohm meter out and making sure that my X and Y screw terminal inputs on the AJAX board were set as listed in the Motors setup scre...

I found this thread: http://www.ajaxcnc.com/ajaxbb/viewtopic.php?f=20&t=360&hilit=Accept+New+Position+Y%2FN I can confirm I get the index pulse on all 3 XYZ Z* X* and Y*. Pic of Motor Parms here: http://www.cnczone.com/forums/ajaxcnc-control-products/262424-forum.html#post1664832 Standing in...

Morning all- Before I ran your final test script and moved into precision config, I left homing until the very end. I am getting the following error for both the X and Z. Did not get to Y yet! WARNING- X axis home differs by 5175 counts Accept New Position Y/N WARNING- Accepting this new position ma...

Hi everyone, The Mill is working GRRREAT! But, in MDI mode, I cannot get the oil pump to turn on. I have the 110Vac hot looping thru the noted relay spot. It is open and will not close to complete the circuit? This pump does NOT have any low level indicators. I tried 178 as 0,1,2, and 3? F10 Save, b...

In a typical Mill this is set to a Zero if you only have 3 axis. This was answered via CNC zone forum

For the search feature here onsite. The fix for missing Motor F or R reverse for axis. part or right side Screen is missing:

Control Panel -> Appearance and Personalization -> Display.
Choose "Smaller (100%)".

Thanks a TON!!