Centroid Community CNC Support Forum

Open the link https://a360.co/48qkrha

This machine is 1990 Pratts and Whitney Fanuc Drill Mate . The part in the photos is a throttle adapter for Honda Type R semi billet intake manifold.

After 9 month of torture, finally the cnc are working that I want . It has minor issues but its ok for me. The great battle was the DMM ac servo those servos dont work with AOk controller, now I install Delta A2 and Im very happy the machine run so smooth.

To do what you are asking for, you would have to break into the axis interface cable between the Oak axis header and JP4 on the DMM servo drive. That is where the axis enable signal is transmitted: from pin 21 of the Oak header to pin 15 of DMM's JP4. You would have to make your external PLC read t...

Thanks! aamir. Ok, this morning I used the Delta PLC that I use to control the Tool changer, to create a timer delay output and make the off delay relay to control the servo driver but It was not useful , because I only could only mantain the power to the driver not the enable signal. I don't know h...

Thanks! CNCSNW for the answer. Im going use the off delay relay.

Hello, everybody. Thanks for all post that help me to solve many problem that I found during the retrofit, but I cant solve one problem. My machine is a Pratt and Whitney Fanuc Drill Mate of 1990. This is the Third time that I retrofit It, two times with Mach3 and CS-Lab and now I use Oak. My proble...