Centroid Community CNC Support Forum

I now have my M400 cemtroid control configured for cnc10 v2.72. I need to network it with my windows 7 64 bit machine to share my cam files. Are there any clear instructions for this task?

Thanks

when i type in \rm cncm.unl.xml it gives me no such file or directory.

as far as the unlocks i also have the tapping, c axis, wcs, unlimited file size,

With the usb installed if i goto update F6, it see a drive as a usb....then it sees instal.sh

if i select it,
it says update complete.....press any key to continue...power off for changes to take effect.


all is still locked

With out the usb it reads c cdrom d links links links.cache md5sums_installed.txt

reads same with usb with the exception of an a infront of the c...

It sees it

ok....report.zip is the name of the file on the usb stick

when i tyoe the command to download to cnc10 i get the following......path does not exist.

the control sees the usb at a: as a generic drive

Thanks...I'll let you know where I stand...

When I did the install I selected no PLC. (When the install was complete it gave me an error at the bottom of the page)...

I decided to do another install on another card but this time selected a PLC. The error went away athe the end of the install...The control booted up.

Now I have a table tilt ...

First off let me say thanks for your help....
OK...I loaded the software onto my new disk. Looks like it took the load.
At the CNC 10 Start Menu v2.72 this is what i get....

An error has occured.

Please report to dealer.....

Dual port base address = ee001000
(open)error loading setup information ...

Right now yes. My desktop is all ata 64 bit running win7 ult.

Last night I stripped the centroid control and will use it to do the download. Unless its not recommended.