Centroid Community CNC Support Forum

report attached

I need some help!! I just completed a acornsix with yaskawa sigma2 drives. I set up the drives according to tb297 which is close to sigma2 although mine are 16 bit encoder so i set dividing ratio to 32768 over 1024. I have perfect motion in jog mode and mdi commands i have confirmed commanded distan...

Machine is fixed and homing properly. Thanks for the help!

I already tryed that. Although i just realized the x and z axis encoder counts are not goin in same direction as the axis when jogging. Y axis is so i edited the hom file and y axis works perfectly could this be my encoder abz channels are mixed up? I did not make the axis cables my self somebody el...

i attached report serial number is 0008dc111213-0228140973

I'm having an issue with my limits and homing. The machine will hit the limit switch and then throw an error for position.. Everything that is very obvious and common has been confirmed motor polarity limits direction PID positive negative values etc The limits all function fine in the pid menu. Oth...

Another strange issue I've been having when does a tool change it'll wait for the carousel to come in as if something's hanging it up if you literally just touch the tool holder with your fingers it'll do the tool change very weird issue my vfd is a delta vfd ve series with encoder feed back all the...

Awsome thanks for the info im sure that will fix it !! I will report

Its not a vfd fault fortunately the vfd has its own encoder the oak has a separate encoder with a small timing belt when the belt was looseit did it more frequently i tighten it and it still does it occasionally

Anyone have a idea what would cause this intermittent fault happening always on decel at nearing zero rpm any help would be appreciated!