Centroid Community CNC Support Forum

I found how to revert back to 4.12 !
Up and running !
Will be watching to see if this problem gets fixed ,so I can upgrade to 4.14
Thanks

I am using the same Switches, and cannot modify the mounts very easily right now ,
other than changing the wiring to home all, is there a fix for this yet?
Upgraded from 4.12 which worked great to the 4.14 upgrade and doesn't home at all past z axis.
how do I revert back to 4.12 easily to get the ...

Ok , ill try and find a report to send , but tell me why it has changed ? I didnt change it since the day I set it up
So that leaves me to think after windows boots up and the software finds a corrupt file and reverts to a backup file on the operating system . Thus software is as buggy as Mach 3 was ...

Here is the screens

I checked and there all good,so I powered down and left alone.
Now I restart and get this screen that says -Axis are cleared but. Have 9031 drive fault.
And nothing works, and cannot home the machine. Shut down and Cycled power several times.
At one point I got a screen msg saying the software was ...

Ok everything was working fine ,and all of a sudden my limit switches don’t respond.
I use alt-I and the switches are green lit, but when I home the machine they don’t stop it and over travel now.
If I manually trip them ,the lights stay green.the only one working is the e-stop switch.
First time I ...

well that worked,except the y axis drive faults out when I move it.! hey its a start !
now to fine tune some things ! I hope

I just got the db 25 adapter in the mail today and the NUC !
Going to setup and do the wizard first again , I found the setup and password to get to 968 setting.
Finally have a report attached if that helps anyone
Thank you all for your Help !

Ok so I need to get in the drive to that parameter?
Also do I need the ENA wired up for these drives to work?
I’ve seen conflicting videos of wether they are to be used or not.right now when I hit cycle start to home the machine
I get a 9031 DRIVE FAULT,
I tried to find the video link of Franco ...

also I just bought the Intel NUC7i3BNK ,instead of this laptop.