Centroid Community CNC Support Forum

geneb wrote: ↑Fri May 03, 2024 2:52 pm I know what the differences in the feature are, I wanted to know if that is the /only/ difference.

No, its not the only difference. Although you can calculate CSR with the Pro licence, I believe you will need the Ultimate licence to automatically use that in machining your parts.

From the Amazon links posted earlier in this thread Your X and Y axis are as follows: STEPPERONLINE High Torque Nema 23 CNC Stepper Motor Rated current 4.2A & resistance 0.9ohms (= nominal 3.78vdc) Supposedly 36vdc https://www.omc-stepperonline.com/nema-23-bipolar-3nm-425oz-in-4-2a-57x57x114mm-4...

If you have a properly configured E-Stop, this will already do the job or am I missing something?

Hi, thanks for the reply, my axis are correct x+ goes to the right, y+ goes towards the machine and z+ upwards I made an intercon program and milled out a part successfully but all the while it was going backwards on the centroid graphics.... Almost certain that your axes are incorrect as Tom sugge...

Did you remember to manually copy your mfunc18.mac from v5.08 to v5.10?

I think Terry is confusing what appears in the Program List when he clicks Windows Start. They are 2 separate Programs but CNC12 when started will automatically start the VCP. If this is not the case, please post a current REPORT.ZIP that Shawn has already requested above. This contains detailed inf...

If I understand your request and ignoring the DXF part, this needs just one main Intercon command with a choice of 2 - Either Bore Array or Drill Array. Assuming your 105 holes are split 7 rows in Y Axis and 15 rows on X axis, you enter Bore or Drill Array and enter increments of nn inches (or mm) f...

Is it possible that this issue has crept back in? I am not able to get TT or probing to work as it used to, and it seems to be acting similar the the linked post. Parameter 404 is set, but it makes no difference this time. Auto Z to plate does not stop upon touch. The input for TT does trip in the ...

Richard, pending your "crossed fingers" it might be worthwhile reviewing the thread on my router where Marc Leonard helped me enormously from start to a very satisfactory finish

https://centroidcncforum.com/viewtopic.php?f=60&t=5561

RJS100 wrote: ↑Wed Mar 20, 2024 5:15 pm Hello Nigel,
The attached is the snubber circuit that I am currently using that was suggested by Uwe. This is wired across the analog output on the Acorn board.
Are you suggesting that I replace this with just the .1uf capacitor?

Yes, that's how I have my system but ensure the cap is ceramic