Centroid Community CNC Support Forum

Yes I get that but even when I had it turning od on 2-1/2" first pass was still max speed. It just goes max speed reuardless where cutter is. Css is the reason I chose acorn. I want it to work. I know it has to be some setting just need to find it.

here are two different ones. names are nothing but both done in intercon, both same results.

I get the css. I also did it in f/m f/r s500, s700. All same results. Here are my tool settings.

This is the program being ran.
https://youtu.be/Z-vq-lnmGG4 (air cut)

I'm not at my machine. It doesnt have Wi-Fi. And I do all this on here with my phone. vfd is setup correct. With the intercon I just did a simple turn job because this is my first cut With the lathe I built. All I did was a simple 1" stock, turn face z+ .050,z-0, .02 pass, x1.05 to x.75, z-.25. .006 ...

Yes I put spindle speed to 1000. Got 250=2.55, 500=5.05, 750=7.53, 1000=10.1. Its only in run mode. Mdi works perfectly. Manual works great. Seems to be in intercon some how. I dont have another way to make the code or I would try that too.

Just hooked up multi meter and it puts out 7.24v then just creeps up to 10.24v over the next few seconds. Any idea?

Is there any luck with this? Mine is doing the same thing. But its just going to full rpm regardless what speed is called in the intercon gcode. S800 goes 1500. S1000 goes 1500. But when I call mdi s640 get 640. Call 500 get 510. Call 1000 get 998. It starts out going 1000rpm regardless then creeps ...

Just got my Teco L510 setup and its working perfect. So it was that Haunyang vfd that was bad. Happy I got the Teco. I was going bald trying to get it to work.

Yeah I just got it first thing this morning. Wouldn't hurt for it to be noted that if buying on weekend you will get it the following Monday.

Ok thank you!