Centroid Community CNC Support Forum

Thank you! Very nice build.

I am located in Sweden

Fredrik

Marty

Yes i did change out the spindle motor, it just seemed like to much of a hassle to work with the old one and with this new motor it will run with 6000rpm at 1:1. Than's for the tip of the lube line i will double check this, i didn't see this when i checked the Y ball screw.

When it comes to ...

My spindel is BT30, and the drawbar is spring loaded so removing the drive tangs is probably a bad idea.

The machine is a Dynamite dm 4400 from -89 i think.
I still have some work to do with the process of moving the arm since from the start it was moved by an electrik motor and this will be ...

Very cool tool changer!

I am doing a retrofit on an older mill with an umbrella style ATC for 10 tools.
And this will help me alot.

I think that i have almost the same type of spindelmotor as you have. When orienting the spindel how is this done? Is it just an index sensor and A macro for cnc12 ...

Gary Campbell wrote: ↑Sun Mar 24, 2019 11:24 am Have you read and followed this? viewtopic.php?f=60&t=2909

Thank you! That did it.

Just did the update to 4.14

And after when i tried and start the program the virtual control panel wont show.

I have rebooter several times, both acorn and cnc12. At the moment the setting are as the program comes.
I also tried loading a backup file with my setting, and that did not work either ...

I too had problems and finally went with a four wire shielded cable from IN 1-4 to a DB9 within the box and gave one input to each signal cable, then outside I left the un-shielded cable to each prox - switch and it works fine other than X is reversed on keypad and have not found a way to change ...

fredrik, I had the very same problem and found the headers SD1 DR1 and so on was not working I changed to the DB25 socket and got everything working other than X axis homing wrong way.

Have a look at the attached it explains how I connected the drivers make sure you change the header to DB25 port ...

Okey i will change back Y.


I have added the schematic thats i went from.

i have dubble checked my wiring on ST1 DR1 EN1 and they all check out.
I only have this picture from my cabinet for the moment, and most of the wiring is temporary so its a mess in there.

I can gett better pictures ...

Hello Marty and thanx for taking your time!

Im pretty new to the cnc world but eager to learn.

I didnt wire anything to the relay i just left it in the program as it was from stock. Now i have disabled al that im not using.
I only have motors and home limit switches connected to the acorn for ...