Search found 68 matches
- Tue Apr 23, 2024 8:38 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: With the Atc option, Can we run without the ATC
- Replies: 6
- Views: 170
Re: With the Atc option, Can we run without the ATC
A 24 tool changer seems to give me repeating decimals. may have to rehome every so often 2500 count quad encoder (10,000) 24 seems to be a bad number for repeating decimals!
- Tue Apr 23, 2024 11:04 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: With the Atc option, Can we run without the ATC
- Replies: 6
- Views: 170
Re: With the Atc option, Can we run without the ATC
The carousel is an air motor. solenoid forward and solenoid reverse. An additional solenoid for high speed rotation on long travel changes. I've got the index pulse near Tool1. I'm wondering if I should be resetting the pulse count on a rollover. I was planning to use the pulses needed from tool to ...
- Mon Apr 22, 2024 8:18 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: With the Atc option, Can we run without the ATC
- Replies: 6
- Views: 170
Re: With the Atc option, Can we run without the ATC
Thanks Mark and all that read and follow,
That will be very helpful As I try to plan this ATC program that now will read the 5th encoder channel instead of a tool counter.
Anyone have a PLC I can compare ideas with that uses a real Quad encoder for ATC positioning?
Thanks,
RobJ
That will be very helpful As I try to plan this ATC program that now will read the 5th encoder channel instead of a tool counter.
Anyone have a PLC I can compare ideas with that uses a real Quad encoder for ATC positioning?
Thanks,
RobJ
- Sat Apr 20, 2024 2:40 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: With the Atc option, Can we run without the ATC
- Replies: 6
- Views: 170
With the Atc option, Can we run without the ATC
While we work on the PLC program can we run the machine without the tool changer and hand load the tools? The guys would like to use the machine while I work on atc problems as we go?
I'd think that would be simple to do but, not as obvious as it seems it should be?
I'd think that would be simple to do but, not as obvious as it seems it should be?
- Sat Apr 20, 2024 8:38 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 131
Re: +\- 10vDc PLC spindle code for ALLINONEDC
We hope to rigid tap as well. So the code change I've made wouldn't be suitable for that?
I'll try your code and find the parameter you mentioned. I think I saw it from another ATC post on your website.
Thanks as always Mark
RobJ
I'll try your code and find the parameter you mentioned. I think I saw it from another ATC post on your website.
Thanks as always Mark
RobJ
- Fri Apr 19, 2024 12:18 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 131
Re: +\- 10vDc PLC spindle code for ALLINONEDC
This seemed to work.
- Sun Apr 14, 2024 4:33 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
- Replies: 5
- Views: 248
Re: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
Thanks Mark, I'm going to check that out and see what changes we should make. I'm not familiar with Fast Stop. I assumed it is emergency cases as well as, tapping, tool changes? Really would you only want to coast to stop at the end of a program? Seems if used to frequently it could be bad on bearin...
- Sun Apr 14, 2024 9:20 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
- Replies: 5
- Views: 248
Re: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
We did resolve this. The owner and I forced on an output setup for fast stopping the spindle and that also worked to enable the drive. The documentation for Siemens just seems complex to find the right information. Late 1990's system. It's labeled PWM but is setup for +10 full forward and -10vdv for...
- Sat Apr 13, 2024 3:15 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 131
+\- 10vDc PLC spindle code for ALLINONEDC
Does anyone have the PLC code for the ALLINONEDC to do spindle control +10vdc forward and (-)10vdc reverse?
- Fri Apr 12, 2024 6:50 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
- Replies: 5
- Views: 248
Re: Siemens Spindle Servo (15Kw) ALLINONEDC Hurco BMC-30
I'm getting the voltage and the enables but, I think I discovered this drive is a PWM. What is the best way to convert or use Centroid to control a PWM spindle servo in your guys experience?