Centroid Community CNC Support Forum

Thanks Dave for your support. The option "Rigit Tapping" was on and disable it, then change the option from "Spindle Encorder" that was on Yes to No and then save both changes. When I reopen Spindle Setup, the "Spindle Encoder" option is set to Yes, it's crazy. Do you h...

Thanks for your support The information that was missing about what I have installed is: 3 DYN2 Servo Drive 1 Power Supply Output: 48VDC 20.8 A 3 Encoder Cable 3m 3 Motor Cable 3 m 3 DYN2 servo drive to Centroid Acorn Motion Cable 0.5 m 2 Servomotor 640-DST-A6TK1 1 Servo motor 86M-DHT-A6MK1 bought f...

Hello, I am from Peru and I have converted my Optimum BF20LV router to CNC with an Acorn card and I use the CNC12 PRO software. In Peru, the energy in the houses is normally single-phase, that is, it only reaches 220 V with Line and Neutral does not come with a ground wire, so usually all equipment ...

Thank you

Sorry I typed "router" and it should say "drilling-milling machine".

Hello, I am from Peru and I have converted my Optimum BF20LV router to CNC with an Acorn card and I use the CNC12 PRO software. In Peru, the energy in the houses is normally single-phase, that is, it only reaches 220 V with Line and Neutral does not come with a ground wire, so usually all equipment ...

Hello when I am configuring in Wizard, the Spindle Setup is always in the option "Yes" and although I change it to "NO" and save the change, when I read the configuration again it is in "Yes". I need this because I want to work with this option from my program. It is wo...

Thank you all for your help. I realized that I had to set as "unused" all the INP that have not been wired yet on the configuration wizard to continue with my tests (I am still working on the project and learning as I move on). Now I can move the servo motors from the CNC x, y, z controls....

Hi, I bought an Acorn CNC Controller kit about a month ago, together with the following DMM products: - (3) DYN2 Servo drives - (2) 640-DST-A6TK1 0.40kw Servo Motors - (1) 86M-DHT-A6MK1 0.75kw Servo Motor - All the required cables to connect the DMM products with the Acorn CNC Controller. I have com...