Centroid Community CNC Support Forum

:D .. i think this is an Oak system.. Please tell us what motor and drives are being used? post photos. have the drive and motors been tuned? I am so sorry i think i use the wrong word to describe the action of the machine movements i will follow the instruction on how to report the problems. but w...

jerky motion on the X axies very rapid movement Easy there, this is supposed to be a family friendly forum. Stepper motors pull out very rough if the current is set too high. Is the drive current set appropriate for the motor? I am so sorry i think i use the wrong word to describe the action of the...

Hey i am having a problem with my retrofit when i home my machine it giving a jerky motion on the X axies very rapid movment in both directions i have to power off the machine . i attach the report please see how i can get some help

Hey guys i pass the system test the index pulse was too close to home i move the switch

Hey i am doing a system test on my mill and not passing the encoder index pulse too close to home i am using estun motor how can i change the position
of the encoder pulse index to home. i am also getting software travel limit are set incorrectly. Here is my report attach

Hey Keith thanks alot

Hey guys i have a problem has anyone know how to connect a Swing arm ATC to oak board with PLC add 1616 on a Matsuura Mill i have an electrician working with but he has little or no knowledge of how this is done if anyone have a drawing on what to connect i would love the help Please another thing d...

cncsnw wrote: ↑Sun Feb 03, 2019 9:46 pm If the machine came from Asia (e.g. Matsuura) chances are good that it has metric screws. It is likely that 2.54 revs/inch is correct, not 2.50 revs/inch.

Thank you

Beauty is, you don't have to know the ballscrew pitch and pulley reduction IF you set the Encoder counts correctly first and then follow the coarse and fine DRO adjustments. You can calculate that. Are you following the Installation manual closely and in the order that it is layed out? I attach bot...

Hey guys i found the problem its just to change the motor rev/inch in the software from 5.000 to 2.500
silly me