Search found 109 matches

by Wolfenstien
Mon Feb 05, 2024 5:21 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: 2001 Milltronics retrofit path
Replies: 8
Views: 863

Re: 2001 Milltronics retrofit path

Apparently that link above didn't come through. I'll see if I can upload a screenshot. Its and N100 processor which has a single core thread performance of 1937.

Just want to make sure I have the wiring mentioned above cleared up before I start ordering stuff.
by Wolfenstien
Mon Feb 05, 2024 5:10 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: 2001 Milltronics retrofit path
Replies: 8
Views: 863

Re: 2001 Milltronics retrofit path

Hoping Marc will have a chance to chime in on the word doc I posted above. There were a number of places on the wiring I wasn't confident with. Regarding a PC for this unit these Nucboxs appear to meet the specs and are pretty affordable. https://www.amazon.com/GMKtec-Mini-PC-Computer-N100/dp/B0CH81...
by Wolfenstien
Fri Feb 02, 2024 9:49 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: 2001 Milltronics retrofit path
Replies: 8
Views: 863

Re: 2001 Milltronics retrofit path

Here is a photo of the intended 14 pin connector array.

I'll be following Marc's advise and buying cables for the servo drives.
by Wolfenstien
Fri Feb 02, 2024 9:46 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: 2001 Milltronics retrofit path
Replies: 8
Views: 863

Re: 2001 Milltronics retrofit path

After a bit of a break I'm back on this project. I was able to reach out to milltronics and receive a copy of the electronics manual for this machine. I've attached it below. I also am attaching a word document below with my intended wiring. Starting on page 38 of the Milltronics electrical manual t...
by Wolfenstien
Sat Jan 27, 2024 9:52 pm
Forum: Buy, Sell, Trade
Topic: IMES Coritec 550i 5 axis dental mill
Replies: 0
Views: 439

IMES Coritec 550i 5 axis dental mill

Good evening all, I've had a 5 axis dental mill i've been meaning to do a retrofit to for about 5 years. There are currently several other machines that I'd like to retrofit first and life has gotten busier so I'm starting to realize there that I'm unlikely to accomplish much more in the next 5 year...
by Wolfenstien
Wed Feb 01, 2023 9:39 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: DC3IOB Lathe
Replies: 7
Views: 1073

Re: DC3IOB Lathe

Have you had any luck trying a floppy drive emulator?
by Wolfenstien
Wed Feb 01, 2023 9:56 am
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: DC3IOB Lathe
Replies: 7
Views: 1073

Re: DC3IOB Lathe

Thank you Mark, I sorta guessed that id be in for a board replacement. Since I'm not actively using the lathe much at this point and have a few other irons in the fire I'm probably just going to live with this setup until I'm ready to go for the all in one. That said: I'm guessing I can get a USB to...
by Wolfenstien
Wed Feb 01, 2023 12:12 am
Forum: Success Stories
Topic: Hurco BMC25 with Acorn
Replies: 3
Views: 7700

Re: Hurco BMC25 with Acorn

aamir wrote: Wed Aug 03, 2022 5:03 am Hello Guys
Finish Hurco BMC25 with Acorn .
https://youtube.com/shorts/HvSV0ad-KXc?feature=share

Aamir
I'd be very interested in knowing how you are liking the acorn control.

Did you have a specific reason for going that direction instead of the oak board?

-Joel
by Wolfenstien
Tue Jan 31, 2023 11:49 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: 2001 Milltronics retrofit path
Replies: 8
Views: 863

2001 Milltronics retrofit path

Good evening all, I have a 2001 Milltronics RH20 that I bought several years ago. Despite really enjoying machining i've not been able to put much time into it over the last few year. One of the things that has kept me from utilizing this mill is the control. From my understanding its is a very dece...
by Wolfenstien
Tue Jan 31, 2023 11:22 pm
Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
Topic: DC3IOB Lathe
Replies: 7
Views: 1073

Re: DC3IOB Lathe

One last photo