Apparently that link above didn't come through. I'll see if I can upload a screenshot. Its and N100 processor which has a single core thread performance of 1937.
Just want to make sure I have the wiring mentioned above cleared up before I start ordering stuff.
Search found 109 matches
- Mon Feb 05, 2024 5:21 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 2001 Milltronics retrofit path
- Replies: 8
- Views: 1069
- Mon Feb 05, 2024 5:10 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 2001 Milltronics retrofit path
- Replies: 8
- Views: 1069
Re: 2001 Milltronics retrofit path
Hoping Marc will have a chance to chime in on the word doc I posted above. There were a number of places on the wiring I wasn't confident with. Regarding a PC for this unit these Nucboxs appear to meet the specs and are pretty affordable. https://www.amazon.com/GMKtec-Mini-PC-Computer-N100/dp/B0CH81...
- Fri Feb 02, 2024 9:49 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 2001 Milltronics retrofit path
- Replies: 8
- Views: 1069
Re: 2001 Milltronics retrofit path
Here is a photo of the intended 14 pin connector array.
I'll be following Marc's advise and buying cables for the servo drives.
I'll be following Marc's advise and buying cables for the servo drives.
- Fri Feb 02, 2024 9:46 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 2001 Milltronics retrofit path
- Replies: 8
- Views: 1069
Re: 2001 Milltronics retrofit path
After a bit of a break I'm back on this project. I was able to reach out to milltronics and receive a copy of the electronics manual for this machine. I've attached it below. I also am attaching a word document below with my intended wiring. Starting on page 38 of the Milltronics electrical manual t...
- Sat Jan 27, 2024 9:52 pm
- Forum: Buy, Sell, Trade
- Topic: IMES Coritec 550i 5 axis dental mill
- Replies: 0
- Views: 2448
IMES Coritec 550i 5 axis dental mill
Good evening all, I've had a 5 axis dental mill i've been meaning to do a retrofit to for about 5 years. There are currently several other machines that I'd like to retrofit first and life has gotten busier so I'm starting to realize there that I'm unlikely to accomplish much more in the next 5 year...
- Wed Feb 01, 2023 9:39 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: DC3IOB Lathe
- Replies: 7
- Views: 1200
Re: DC3IOB Lathe
Have you had any luck trying a floppy drive emulator?
- Wed Feb 01, 2023 9:56 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: DC3IOB Lathe
- Replies: 7
- Views: 1200
Re: DC3IOB Lathe
Thank you Mark, I sorta guessed that id be in for a board replacement. Since I'm not actively using the lathe much at this point and have a few other irons in the fire I'm probably just going to live with this setup until I'm ready to go for the all in one. That said: I'm guessing I can get a USB to...
- Wed Feb 01, 2023 12:12 am
- Forum: Success Stories
- Topic: Hurco BMC25 with Acorn
- Replies: 3
- Views: 8513
Re: Hurco BMC25 with Acorn
I'd be very interested in knowing how you are liking the acorn control.aamir wrote: ↑Wed Aug 03, 2022 5:03 am Hello Guys
Finish Hurco BMC25 with Acorn .
https://youtube.com/shorts/HvSV0ad-KXc?feature=share
Aamir
Did you have a specific reason for going that direction instead of the oak board?
-Joel
- Tue Jan 31, 2023 11:49 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: 2001 Milltronics retrofit path
- Replies: 8
- Views: 1069
2001 Milltronics retrofit path
Good evening all, I have a 2001 Milltronics RH20 that I bought several years ago. Despite really enjoying machining i've not been able to put much time into it over the last few year. One of the things that has kept me from utilizing this mill is the control. From my understanding its is a very dece...
- Tue Jan 31, 2023 11:22 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: DC3IOB Lathe
- Replies: 7
- Views: 1200
Re: DC3IOB Lathe
One last photo