Search found 24 matches
- Sun Apr 28, 2024 10:31 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 6
- Views: 501
Re: Speed around corners
G'day Joey Yes the dip switches are definitely set to 3200 No it didn't help ... so I tried to set the P230 ( curve speed multiplier ) to 5% maybe slow it a bit more .. but minimum you can go is 10% So I just changed P223 to 150 as a starting point... He'll be testing it out tomorrow morning .. I'll...
- Thu Apr 25, 2024 7:28 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 6
- Views: 501
Re: Speed around corners
Hi Joey The machine is using CL86Y drivers for all three axis Attached are photos of the gantry rack & pinion. I'm not cleaver enough to tell you the gearing in this thing. However, I can tell you best " Overall Turns Ratio " I can get for X Y is 29ish mm/turn. This figure falls just o...
- Tue Apr 23, 2024 8:00 pm
- Forum: Acorn CNC Plasma
- Topic: Speed around corners
- Replies: 6
- Views: 501
Speed around corners
G'day guys
Can anyone point me into the right cut direction ... the torch seems to be speeding up into the corners
Tried smoothing settings without luck ... Nothing in the Profile Manager settings ..
So I'm a little lost
Appreciate any help
Can anyone point me into the right cut direction ... the torch seems to be speeding up into the corners
Tried smoothing settings without luck ... Nothing in the Profile Manager settings ..
So I'm a little lost
Appreciate any help
- Sun Apr 21, 2024 6:40 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Re: Laser Alignment
Hi Joey,
That would be great if you have the time
That would be great if you have the time
- Thu Apr 18, 2024 9:41 pm
- Forum: Acorn CNC Plasma
- Topic: Issues with Torch Calibration
- Replies: 29
- Views: 3046
Re: Issues with Torch Calibration
Problem Found and Solved The earthing issues pointed out by Joey helped heaps ... Main problem apart from that was that the previous tech who installed MACH3 and some Ebay THC went and re-wired the Hypertherm connector wiring/pins. It didn't occur to me that someone would have played around with fac...
- Thu Apr 18, 2024 7:12 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Re: Laser Alignment
oh, in case you need to check setup
- Thu Apr 18, 2024 7:10 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Re: Laser Alignment
OK so that's not happening for me...
I copied a new mfunc35 file into the directory, thinking maybe there was something wrong there ...
I set the XY pointer offsets back to zero in the wizard..
none of those have worked
I copied a new mfunc35 file into the directory, thinking maybe there was something wrong there ...
I set the XY pointer offsets back to zero in the wizard..
none of those have worked
- Thu Apr 18, 2024 6:56 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Re: Laser Alignment
Joey, Hi ... That's exactly what I'm doing .. test fire, then click " Laser Set XY " follow the on screen macro instruction to set the offset After this is done, I want to move to a piece which requires cutting, I need to select start point on that piece ... that's where I'm saying its los...
- Wed Apr 17, 2024 11:55 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Re: Laser Alignment
Hi Joey, Thanks for the solution ... it sort of worked :( :( Following your suggestion, the DRO indeed said-68, +5 OK, so here's the problems; Yes, it see an offset and displays that offset on DRO, but when you actually want to set the corner of you work piece (X0,Y0) it loses that offset. I thought...
- Wed Apr 17, 2024 10:12 pm
- Forum: Acorn CNC Plasma
- Topic: Laser Alignment
- Replies: 9
- Views: 511
Laser Alignment
I'm trying to set the offset between the plasma nozzle and the laser pointer; the measured offset is -68(x) 5(y) I've tried editing the mfunc35.mac and entering the above G92 X[-68] Y[5] That didn't work ... Then added the numbers into Acorn Wizard >> Input Devices >> Cross hair laser setup Didn't w...