Centroid Community CNC Support Forum

G'day Joey Yes the dip switches are definitely set to 3200 No it didn't help ... so I tried to set the P230 ( curve speed multiplier ) to 5% maybe slow it a bit more .. but minimum you can go is 10% So I just changed P223 to 150 as a starting point... He'll be testing it out tomorrow morning .. I'll...

Hi Joey The machine is using CL86Y drivers for all three axis Attached are photos of the gantry rack & pinion. I'm not cleaver enough to tell you the gearing in this thing. However, I can tell you best " Overall Turns Ratio " I can get for X Y is 29ish mm/turn. This figure falls just o...

G'day guys
Can anyone point me into the right cut direction ... the torch seems to be speeding up into the corners
Tried smoothing settings without luck ... Nothing in the Profile Manager settings ..
So I'm a little lost
Appreciate any help

Hi Joey,
That would be great if you have the time

Problem Found and Solved The earthing issues pointed out by Joey helped heaps ... Main problem apart from that was that the previous tech who installed MACH3 and some Ebay THC went and re-wired the Hypertherm connector wiring/pins. It didn't occur to me that someone would have played around with fac...

oh, in case you need to check setup

OK so that's not happening for me...

I copied a new mfunc35 file into the directory, thinking maybe there was something wrong there ...
I set the XY pointer offsets back to zero in the wizard..
none of those have worked

Joey, Hi ... That's exactly what I'm doing .. test fire, then click " Laser Set XY " follow the on screen macro instruction to set the offset After this is done, I want to move to a piece which requires cutting, I need to select start point on that piece ... that's where I'm saying its los...

Hi Joey, Thanks for the solution ... it sort of worked :( :( Following your suggestion, the DRO indeed said-68, +5 OK, so here's the problems; Yes, it see an offset and displays that offset on DRO, but when you actually want to set the corner of you work piece (X0,Y0) it loses that offset. I thought...

I'm trying to set the offset between the plasma nozzle and the laser pointer; the measured offset is -68(x) 5(y) I've tried editing the mfunc35.mac and entering the above G92 X[-68] Y[5] That didn't work ... Then added the numbers into Acorn Wizard >> Input Devices >> Cross hair laser setup Didn't w...