Centroid Community CNC Support Forum

and SpinFWD with be controlled with M03 and M05?

Keith, Thank you

Let me rephrase the question.

I know how to wire the relay to turn the motor on and off.

How do I get that relay to be controlled with M03 and M05 commands? I assume the M03 and M05 are controlling the VFD output on the board.

I have an enco unimat lathe build. I have the drives up and the repeating as well as I can expect for what I am working with. I want to use one of the relays to turn the 120v AC spindle motor on and off. I am not looking for speed control ( that is with pullies) or ccw or cw rotation not an option w...

I have a Unimat small jewelers lathe project.

I have everything installed and x and z are moving in the correct directions.

Where is Acorn set up do I go to set up the movement to of the x & z to match the movement displayed on the screen?

Thank you but why use the H6 connector when you have the h2 and h3 connectors on the board?

Getting away from that DB25 was the main reason I went with Acorn.

https://www.makerguides.com/wp-content/ ... Manual.pdf

I used the stepper line cl57Y for the wiring diagram.

I am working on a small lathe project.

I am using NEMA 17 stepper motors and EASON TB6600 drivers. the TB6600 driver is not listed in the config wizard.

How do I configure the driver?